Four-piston Magura hydraulic disc brakes for e-MTBs, S-Pedelecs, electric scooters and heavier machines such as the Sur-Ron and Talaria. Pick the MT5 eSTOP, the MT5e with a HIGO e-switch in the lever for motor cut-off, or the MT7 PRO with its one-finger lever. Then add a Dovetail Interlink rotor in 180, 203 or 220 mm, the matching QM caliper adapter and, when the old ones wear out, 8.R Race pads.
Showing all 10 results
What a complete brake needs
- One set per wheel. Every Magura set here brakes one wheel and includes its own lever, caliper and hose. Order two for front and rear.
- Rotor and adapter. Neither is in the box. For heavier electric bikes, a 203 mm or 220 mm rotor is recommended, because a larger disc manages heat better under repeated hard braking.
- The right QM adapter. The QM 44 moves a post mount 180 mm caliper up to a 203 mm rotor, and the QM 46 takes a post mount 203 mm caliper to a 220 mm rotor.
- Mineral oil only. These brakes run on Magura Royal Blood. Never fill them with DOT fluid.
MT5 eSTOP, MT5e or MT7 PRO
The MT5 eSTOP was tuned for motorised machines and comes with a 2-finger lever and 8.S Sport pads. The MT5e brings the four-piston caliper concept of the MT7, a 3-finger lever and 9.P Performance pads, and hides the HIGO e-switch inside the lever, where it can cut the motor or switch a brake light. Order the NO (normally open) or NC (normally closed) version to suit what your controller expects. The MT7 PRO uses a one-finger HC lever for fine control on steep descents. All of them come with a 2200 mm hose, long enough for long-frame builds.
You can also collect Magura parts from our Kaunas workshop at S. Raštikio g. 28.
Frequently asked questions
Does a Magura brake set cover both wheels?
No. Each set is for one wheel, with one lever, one caliper and one hose. A full front and rear conversion needs two sets.
Should I choose the MT5e HIGO NO or NC?
It depends on your controller. The NO version is a normally open contact that closes when you pull the lever, and the NC version is normally closed. Check which logic your controller uses for motor cut-off before ordering, or email us your controller model.
Which rotor size should I fit on a heavy e-bike?
203 or 220 mm rotors are recommended for heavier electric platforms, because a larger disc handles heat better. A QM 44 adapter moves a 180 mm post mount caliper to 203 mm, and a QM 46 moves a 203 mm caliper to 220 mm.
Are rotors and adapters included with the brake?
No. Rotors, mounting adapters and bolts are sold separately, so you can choose them for your frame or fork mount and your rotor diameter.
Which pads fit the MT5 and MT7?
The Magura 8.R Race pads are made for MT5, MT5e, MT5 eSTOP and MT7 four-piston calipers. They bite hard from the moment you pull the lever and stay stable at high temperature.
