Electronics for the Talaria X3, also sold as the XXX. The upgrade that changes the ride is FabiRide Dash Pro: it reads the stock XXX controller, recognises the model by itself and gives you a speed limit you choose, separate limits for each rider and every ride on record. Also on this shelf: the OEM throttle grip, the QS8 power harness and a 12V converter for lights and accessories. On a Sting? See Sting electronics.
Showing all 10 results
Dash Pro on a stock X3
The XXX ships with a screen that shows speed, battery and mode. Dash Pro swaps it for a colour display on the same stock controller: nothing is reprogrammed or replaced, and no wire is cut. Hold the bike to 25 km/h on the way to the trail and lift the cap from the app once you arrive, give a younger rider a ceiling of their own, and replay any ride on its map. Traction control, cruise control and throttle response are yours to adjust, and calls, music and notifications appear on the display. The box holds the display, a handlebar bracket, the handlebar remote with its clamp and the leads. When ordering, pick Talaria, then the MX3, MX4, MX5, X3 option. Dash Pro carries a 24 month warranty. Order FabiRide Dash Pro, or see the Talaria XXX display upgrade and the full compatibility list.
Throttle, power and 12V parts for the XXX
- OEM throttle grip: the Talaria Sting throttle grip is listed for the XXX as well as the MX4 and MX5. Its round green connector plugs into the Talaria harness, and it mounts on the right side of a 22.2 mm bar.
- QS8 6 AWG power harness: a direct replacement for the stock battery lead on the Sting and 3X, for builds that draw more current. The battery side needs a female QS8 connector.
- DC-DC converter: steps 20 to 84V down to a steady 12V at up to 5 A, enough to run lights, a horn, USB modules or a camera, in an IP67 housing.
The Torp thumb throttle here is a secondary regen and reverse input for bikes running a Torp TC500 or TC1000 controller, not a part for the stock XXX. Not sure what your bike has? Send a photo to info@fabiride.com. Delivery options and the exact cost are shown at checkout.
Frequently asked questions
Does Dash Pro work on a completely stock Talaria XXX?
Yes. It reads the stock controller on the XXX, also sold as the X3, and recognises the model by itself. Nothing on the bike is reprogrammed, replaced or cut.
Which option do I choose when ordering Dash Pro for my X3?
Choose Talaria as the bike, then the option for the MX3, MX4, MX5 and X3. The leads for the stock controller come in the box.
Can Dash Pro limit the speed of my X3?
Yes. Set 25 km/h, 45 km/h or any figure you like, lock it for a rider who may not change it, and lift it from the app when you are off the road.
Does the Talaria Sting throttle grip fit the XXX?
Yes. The OEM grip is listed for the XXX, MX4 and MX5. Its round green connector plugs straight into the Talaria harness with no soldering, and it fits the right side of the bar only.
How do I power 12V lights or a USB charger on my X3?
Use the 20V to 84V to 12V DC-DC converter. It delivers up to 5 A, about 60 W, from the main battery and sits in an IP67 housing.
