Bafang parts for mid-drive e-bikes, picked by a workshop where Bafang motors are among the systems repaired most often. Find the original Bafang speed sensor, Higo extension cables and splitters, PAS sensors, throttles and the ASI BAC855 kit that lets a BBSHD pull 4 kW. For the handlebars, FabiRide Dash Pro replaces the Bafang display with a colour screen, a speed limit you choose and every ride recorded.
Shop by part
Showing 1–15 of 22 results
BBSHD controller upgrade
The ASI BAC855 BBSHD controller upgrade kit swaps the stock controller for an ASI BAC855 on a harness that matches every original BBSHD plug, so no wire is cut or soldered. It ships set to 4 kW and configured for your 48V, 52V, 60V or 72V battery, with a motor temperature sensor and a remote tuning session with our engineer. Converting by yourself? The BBSHD to ASI BAC 855 wiring harness and the BBSHD controller cover for the empty motor bay are sold on their own.
Upgrade the Bafang display to FabiRide Dash Pro
FabiRide Dash Pro does the Bafang display's job and adds a ride map, navigation on bike paths, music and calls on the bars and a crash alert. Assist levels sit on the handlebar buttons, pedal assist strength is set in the app without a laptop, and the speed limit you set can only be lifted in the app. It fits BBS01, BBS02 and BBSHD drives, M-series units from the M200 to the M820, and a BBSHD running the ASI BAC855. The lead plugs in where the old display was connected and the motor is not reflashed. Every Dash Pro has a 24 month warranty.
Spares checklist
- The original Bafang speed sensor suits Bafang motors from 250W to 1000W.
- The Higo 1T4 splitter and the 8-pin to 1T4 extension fit harnesses with the standard Higo 8-pin layout found on Bafang mid-drive and hub motor systems.
- The Domino short-throw twist throttle works on Bafang setups, ASI BAC855 conversions included.
In-stock Bafang parts leave our Kaunas workshop within 1 to 3 business days.
Frequently asked questions
Will the ASI BAC855 kit fit my Bafang?
It fits the Bafang BBSHD mid drive. Every connector on the harness matches the original BBSHD plugs, and only the controller is replaced, so the motor stays where it is.
Do I have to reprogram the BBSHD kit for a different battery?
No. It runs 48V, 52V, 60V and 72V batteries as delivered. With FabiRide Dash Pro you also set the battery voltage yourself from the bars, so the low voltage cut-off follows the pack you fit.
Which Bafang motors does FabiRide Dash Pro support?
BBS01, BBS02 and BBSHD mid-drives and the M-series from the M200 to the M820, including the M500, M510, M560 and M600. It also works on a BBSHD converted to the ASI BAC855. When ordering, choose Bafang and the lead for BBS or M-series drives.
Can I change my Bafang pedal assist without a programming cable?
Yes, with FabiRide Dash Pro. How strongly each assist level pulls is set in the free FabiRide app, with no laptop and no programming cable.
Do you repair Bafang motors?
Yes. Bafang mid-drives are among the motors our Kaunas workshop repairs most often, from worn gears, bearings and seals to sensor and control faults. Send the whole e-bike or only the motor or controller after contacting us.
