Talaria upgrades Sting MX3 / MX4 / MX5 power upgrades and chassis development, built in Kaunas
Talaria upgrades at the FabiRide workshop in Kaunas mean focused power gains for the Talaria Sting MX3, MX4 and MX5, together with controller, battery pack, suspension and chassis work. Every electric motorcycle is prepared so that power, handling and reliability stay in balance - on the track and off road alike.
With Talaria in Lithuania - from the very start
From the first Talaria motorcycle imported directly from the factory to advanced MCU controller programming - FabiRide pioneered Talaria tuning and custom solutions in Lithuania.
The first Talaria in Lithuania
We were the first in Lithuania to import a Talaria directly from the factory - long before the brand became widely known.
Pioneers of tuning and repair
We were the first workshop in Lithuania to offer custom Talaria tuning and repair, so we have built up the deepest hands-on experience with this platform.
Custom systems and MCU
We build and integrate complex custom systems in-house, and program the most advanced motor controllers (MCU), including ASI and SiliXcon.
What Talaria tuning covers
The Talaria Sting is a modular platform, so we plan every upgrade around how you actually ride. For some riders maximum track power matters most; for others it is longer range or softer suspension on technical off-road sections. We split the work into four main areas.
Power gains
We raise Talaria Sting torque and power by matching controller, motor and battery pack parameters. Power is increased in stages so the transmission and cooling can handle the extra load.
Controller upgrades
We fit and configure more powerful controllers, including Torp-type solutions. Speed, torque and throttle response curves are reprogrammed to suit your riding style.
Battery packs
We upgrade and replace Talaria battery packs with higher-capacity or higher-current modules. We check the BMS, connectors and cooling so energy delivery stays stable.
Suspension and chassis
We develop the Talaria suspension and chassis: tuning dampers, springs and geometry, and reinforcing critical areas so the bike stays precise with more power on tap.
More power that stays controllable
Raising Talaria power without balanced brakes, suspension and cooling quickly turns into a problem. That is why every Talaria Sting build starts with diagnostics and ends with a test ride - we raise power only as far as the bike can safely put it down on road and trail.
- Controller replacement and custom programming
- Motor condition and cooling assessment
- Battery capacity, current delivery and BMS
- Transmission, chain and sprocket setup
- Brake system upgrades for higher power
- Suspension and chassis geometry check
Talaria upgrade work up close
Talaria and Sur-Ron electric motorcycles share similar components, so we apply the same proven upgrade solutions to both platforms - from a controller upgrade to a complete power project.
Every Talaria upgrade project starts with a conversation about your goals and an assessment of the bike. Only then do we put together the plan of work and parts.
Trust your Talaria upgrade to the specialists in Kaunas
The FabiRide workshop in Kaunas specialises in the repair and tuning of Talaria and Sur-Ron electric motorcycles - from a single controller upgrade to a complete power and chassis project. Parts are shipped across the EU and worldwide, and you can send us your bike, battery pack or faulty component for rebuild and programming.
Deep Talaria experience
We work with Sting MX3, MX4 and MX5 models and their components every day, so we know the weak points and the most effective upgrade solutions.
Diagnostics before work
Before raising power we assess the condition of the battery, motor, brakes and chassis, so the upgrade is safe and durable rather than risky.
Proven parts
We use proven controllers, battery modules and suspension components, and choose solutions based on how the bike is really used.
Reversible tuning
We document every change and, wherever possible, keep it reversible - you can adjust the settings later or return to the factory configuration.
Talaria upgrades - frequently asked questions
01How is a Talaria upgrade project planned?
The scope depends on your goals and the components you choose. A single controller upgrade is a far smaller job than a complete project covering power gains, a battery pack change and suspension work. At the FabiRide workshop in Kaunas we always put together an individual plan - only after assessing the bike and discussing what you want from it.
02How much power can a tuned Talaria Sting make?
Power is mostly determined by the controller and battery pack combination: a more powerful controller, such as a Torp, allows more current to be delivered, while a higher-current battery pack makes sure that power is available consistently. The exact result depends on the model (MX3, MX4 or MX5) and its condition, so we select the power level individually, taking the transmission, brakes and cooling into account.
03Is Talaria tuning safe and reversible?
Yes, when it is done in a balanced way. At FabiRide we only raise power once we have assessed the brakes, suspension and cooling, and wherever possible we keep changes reversible - settings can be adjusted or returned to the factory configuration. That is exactly why every Talaria build starts with diagnostics and ends with a test ride.
04What does Talaria suspension and chassis work involve?
Suspension work covers setting up dampers and springs for your weight and riding style, checking the geometry and reinforcing critical chassis areas. This matters even more once power goes up - a stronger, better-matched chassis lets the Talaria stay in control at speed and on technical off-road sections.
05Can you help if I am not based in Lithuania?
Yes. The workshop is in Kaunas, but you do not need to ride to us: parts are shipped across the EU and worldwide, and you can send in your bike, battery pack or faulty component for repair, rebuild and programming. Get in touch and we will agree the most convenient option.
Request a Talaria upgrade consultation
Tell us how you ride your Talaria Sting and what you are after - power, more range or a better chassis. We will put together a clear upgrade plan, built and programmed in our Kaunas workshop.
