Electronics and power upgrades for the SurRon Light Bee X, from a sharper throttle to a complete controller swap. Begin at the handlebars: FabiRide Dash Pro works on the stock Light Bee X controller, holds 25 km/h or any limit you set until you lift it in the app, and records every ride. Further down you will find Torp and SiliXcon controllers, the ASI wiring harness, the Domino throttle, QS8 power wiring and genuine Sur-Ron sensors.
Showing 1–15 of 34 results
Dash Pro: more from the stock controller, no swap needed
The factory Light Bee X controller cannot be rewritten, so a speed limit or riding modes on the bars used to mean replacing it. Dash Pro leaves that controller untouched and takes charge from the handlebars: ECO and SPORT on the remote, a limit you lift in the app, separate limits for each rider, and your music and calls on the screen. Move to a Torp, ASI or SiliXcon controller later and the display stays on the bars; only the leads change. 24 month warranty. The SurRon display upgrade page shows how it compares with a replacement screen.
Controllers, motor, throttle and wiring
- Controllers: the Torp TC1000 2.X for the Light Bee, the SiliXcon SC 1040 for 72V builds, and the ASI BAC wiring harness, which connects an ASI BAC4000 or BAC8000 to the factory loom without soldering.
- Motor: the Sotion 26 kW IPM motor for builds that have outgrown the stock Light Bee motor.
- Throttle: the Domino short-throw throttle; on the stock controller it plugs in through the Domino adapter cable. For repairs there is the genuine Hall sensor with temperature sensor.
- Power wiring: the QS8 6 AWG power harness and the main battery power cable, plus a 12V converter for lights, a horn or USB.
Before you order
A stronger controller only works as well as the parts around it: battery voltage, power wiring and throttle all have to suit it, and a 72V pack needs a controller rated for 72V. We program ASI and SiliXcon controllers in our Kaunas workshop and tune Torp and EBMX, so you can plan a Light Bee X tune with us or send the controller in. Questions about your build go to info@fabiride.com.
Frequently asked questions
Does Dash Pro work on a stock Light Bee X?
Yes. Dash Pro connects to the factory Light Bee X controller as it is, with nothing cut or replaced. You get live speed, power and battery readings, ECO and SPORT on the handlebar remote, a speed limit you choose and every ride recorded in the app.
Can I limit my Light Bee X to 25 km/h?
Yes, with Dash Pro. Set 25 km/h, 45 km/h or any number with power aggressiveness control to match, lift the limit in the app when you reach the trail and switch it back on from the handlebar buttons for the ride home.
Does the Domino throttle work with the stock controller?
Yes, through the Domino throttle adapter cable for the Light Bee OEM controller, which plugs in without soldering or crimping. On an aftermarket controller the throttle settings often need re-tuning after fitting.
Do I need new power wiring for a controller upgrade?
Higher current builds benefit from the QS8 6 AWG power harness, a direct replacement for the OEM battery to controller lead that cuts voltage drop and cable heating. An ASI BAC4000 or BAC8000 connects to the factory wiring with the ASI BAC wiring harness.
Can you program my controller?
Yes. Our Kaunas workshop programs ASI and SiliXcon controllers and tunes Torp and EBMX. Email info@fabiride.com with your build, then post the bike or the controller to us once we have agreed the work.
