EggRider V2 Bluetooth Display for E-Bikes & E-Scooters (12V-52V)

The EggRider V2 display is a compact Bluetooth dashboard built for electric bikes, electric scooters and light electric vehicles. It runs on an operating voltage of 12V-52V, so one unit covers 36V, 48V and 52V battery systems. The display connects directly to your motor controller and pairs with the EggRider mobile app on your phone.

This is a display module, not a bike or a scooter. In other words, it is the dashboard through which controller parameters are read and changed. It shows speed, distance and battery status. At the same time, it lets you adjust controller settings without any extra programming hardware.

Compatibility centres on Bafang BBS, BBSHD, Ultra and M600 mid-drive motors. In addition, the unit works with Kunteng (KT), Lishui, Votol, Fardriver, sine wave and Sabvoton family controllers. EggRider is an electronics company founded in Vilnius, Lithuania. Consequently, the device is designed as a universal aftermarket solution rather than a part tied to one vehicle. On request, we also adapt this display to run on 72V batteries – orders can be placed by email at info@FabiRide.com.

Key Benefits

• Bluetooth connectivity – wireless pairing with the EggRider mobile app is built into the display itself.
• 12V-52V operating voltage – a single unit suits 36V, 48V and 52V battery systems.
• 72V version on request – we adapt the display for higher voltage systems as a separate order.
• Controller parameter editing – current limit, speed limit and wheel diameter settings are changed from your phone.
• PAS assist levels – pedal assist levels can be reconfigured directly in the app.
• Throttle settings – throttle behaviour and response are adjustable to suit your riding style.
• Compact housing – the display mounts on the handlebar and takes up very little bar space.
• Controller-specific firmware – each unit ships with firmware matched to your particular controller.

Who Is This Display For?

The EggRider V2 suits electric bikes, electric scooters and light electric vehicles whose controller has a standard display connector. Above all, it is used with Bafang BBS, Bafang BBSHD, Bafang Ultra and Bafang M600 mid-drive motors. These are the most common pairings among conversion builds.

Beyond Bafang, the display also works with Kunteng / KT, Lishui, Votol and Fardriver controllers. Sine wave controllers and the Sabvoton family are supported as well. However, compatibility depends on the exact controller model and its connector. For that reason, the firmware is selected to match your specific controller.

This display is aimed at riders who tune their own vehicle, at workshops and at e-bike builders. Consequently, it is often chosen by people who want to change power and speed settings without a laptop or a programming cable. If your build is a 72V system, the custom-adapted version covers that too.

Technical Specifications

Why Choose the EggRider V2 Display?

Standard displays only show speed and the current assist level. The EggRider V2, by contrast, acts as a full controller interface. Therefore you change parameters on your phone instead of through a factory menu with limited options.

The wide 12V-52V range covers the majority of e-bike and scooter systems in use today. Moreover, rarer 72V builds are handled through the custom-order version. As a result, one display format serves both everyday commuters and more powerful machines.

Firmware is matched to your controller, whether that is Bafang, KT, Lishui, Votol or Fardriver. Because of this, the unit arrives ready to talk to your hardware rather than needing generic setup. Riders who tune current limits, speed caps and PAS levels regularly get the fastest workflow here.

Frequently Asked Questions

Does the EggRider V2 work with Bafang BBS and BBSHD motors?

• Yes. Bafang BBS and BBSHD mid-drives are among the primary supported systems.
• Bafang Ultra and M600 mid-drives are supported as well.
• Firmware is selected to match your specific Bafang controller.

Which other controllers are compatible?

• Kunteng (KT), Lishui, Votol and Fardriver controllers.
• Sine wave controllers and the Sabvoton family.
• Compatibility depends on the controller model and its display connector.

What battery voltages does it support?

• The operating voltage is 12V-52V.
• That covers 36V, 48V and 52V systems with one unit.
• A 72V version is available as a separate custom order.

How do I order the 72V version?

• Send your request by email to info@FabiRide.com.
• We adapt the display for higher voltage systems on request.
• State your controller model so the firmware can be matched.

What settings can I change from the app?

• Current limit and speed limit.
• PAS assist levels and wheel diameter.
• Battery settings and throttle behaviour.

Do I need a laptop or programming cable?

• No. All adjustments are made over Bluetooth from your phone.
• The EggRider app runs on iOS and Android.
• No additional programming hardware is required.

Is this a complete bike or scooter?

• No. It is a display module that connects to an existing motor controller.
• It functions as the dashboard for reading and editing controller parameters.
• It mounts on the handlebar via the standard display connector.

Who makes the EggRider V2?

• EggRider, an electronics company based in Vilnius, Lithuania.
• The device is built as a universal aftermarket solution.
• It is not tied to any single vehicle brand or model.

The EggRider V2 turns a basic handlebar readout into a full tuning interface for your build. Speed, distance and battery status stay visible while you ride. Meanwhile, current limits, speed caps, PAS levels and wheel diameter remain a few taps away in the app. For Bafang, KT, Lishui, Votol and Fardriver systems alike, tell us your controller and the correct firmware comes fitted.