Compact 2-position switch with rubber protectors for mounting on the steering wheel. Reliably operate the controller, lights/bulbs, power limiter or assistant levels – even in poor weather conditions.
Key benefits
- Environmental resistance – rubber protection traps dust and moisture.
- Versatile applications – on/off, eco/sport, limiter, lights, etc.
- Quick installation – mounts directly on the steering wheel, clear wiring.
- High performance up to 100 V and 8 A (suitable for most e-mobility systems).
Specifications
- Type: 2-position switch (ON/OFF)
- Mounting: on the steering wheel (with bracket)
- Protection: rubber boot against dust and moisture
- Max. Voltage: 100 V
- Max. Current: 8 A
- Wiring/connections: lead-out wires (to be adapted to the diagram)
Compatibility
- Electric bikes, scooters, moto and e-moto (DC circuits up to 100 V / 8 A)
- Controls, lights, assistance levels, limit inputs (according to your system diagram)
Installation tips
- Observe the polarity and the manufacturer’s diagram (for the controller/lamps).
- Route the wires in such a way that they do not rub or twist in a bend.
- For circuits close to 8 A, use wires of the appropriate cross-section and fuse.
- Check the operation of the switch before actually driving.
FAQ
Is it suitable for 48 V or 72-80 V systems?
Yes, as long as the current does not exceed 8 A. Always refer to the diagram of your equipment.
Is the switch rainproof?
Rubber protection against splashes and dust. Avoid prolonged immersion.
Can I control the help levels?
Yes, if your controller has the appropriate inputs. Connect according to the manufacturer’s instructions.
handlebar switch, 2-position switch, e-bike switch 100V, headlight switch, limit switch, rubber switch, FabiRide
