12V-80V USB Phone Charger for Bike, E-Scooter & Motorcycle – 5V 2A

This 12V-80V USB phone charger is a DC-DC step-down converter built for handlebar mounting on a bicycle, electric scooter or motorcycle. It draws power from the vehicle battery and reduces an input of 12V to 80V down to a steady 5V output. Maximum output current is 2 A, which equals up to 10 W.

The wide input range is what sets this module apart. One unit covers 12V and 24V motorcycle systems as well as 36V, 48V, 52V, 60V and 72V e-scooter and e-bike batteries. Therefore you do not need a separate charger model for each vehicle in your garage.

A standard USB port sits on the front of the housing. Simply plug in a smartphone, a navigation unit or an action camera using the cable you already own. This is not a household adapter – it is a permanently wired component fed directly by the vehicle battery.

Key Benefits

• Wide 12V-80V input range – a single module works with motorcycle, e-scooter and electric bicycle systems.
• Stable 5V output – the standard USB voltage expected by smartphones and navigation devices.
• 2 A output current – up to 10 W, enough to charge a phone while you ride.
• USB port – an ordinary USB cable is all you need, with no extra adapters.
• Handlebar mounting – the charger stays visible and within easy reach.
• Powered by the vehicle battery – your phone charges for the whole route without a power bank.
• Universal design – the module is not tied to one manufacturer or model.
• Compact DC-DC module – it takes up little space and does not interfere with the controls.

Who Is This Charger For?

This 12V-80V USB phone charger suits bicycles, electric bicycles, electric scooters and motorcycles. It fits any vehicle whose battery voltage falls inside the 12V-80V window. That includes 12V and 24V motorcycle and moped systems.

On the electric side, it covers 36V, 48V, 52V, 60V and 72V scooter and e-bike battery packs. City commuters who rely on phone navigation get the most obvious use. Couriers and food delivery riders also choose it, because their phone must stay alive for a full shift.

In addition, the module helps on longer routes where a single phone charge simply runs out. Because it mounts to the handlebar and wires into the vehicle supply, it suits riders who handle their own electrical work or use a service shop.

Technical Specifications

Why Choose This Converter?

Most automotive USB modules only handle 12V or 24V systems. This converter accepts up to 80V instead. As a result, you can wire it straight to a 60V or 72V scooter battery with no intermediate step-down stage in between.

Power comes from the vehicle battery, so there is no external pack to carry or recharge. The phone keeps charging for as long as the supply is live. That matters most with navigation apps, which drain a battery quickly.

The design stays universal rather than model-specific. Before installation, however, confirm that your battery voltage does not exceed 80V.

Frequently Asked Questions

What are the input and output voltages?

• Input voltage runs from 12V to 80V, taken from the vehicle.
• Output is 5V, the standard USB voltage.
• Maximum output current is 2 A.

Does this charger work with a 60V or 72V electric scooter?

• Yes, 60V and 72V packs fall inside the 12V-80V input range.
• It also suits 36V, 48V and 52V scooter systems.
• The ceiling is 80V, so higher-voltage systems are out of scope.

Which vehicles is it compatible with?

• Bicycles and electric bicycles with a battery in range.
• Electric scooters from 36V through 72V.
• Motorcycles and mopeds running 12V or 24V systems.

How much power does it deliver?

• Up to 10 W, calculated from 5V at 2 A.
• That covers a smartphone charging during the ride.
• Navigation units and action cameras also run from the same port.

Where should the charger be mounted?

• On the handlebar, where the USB port stays reachable.
• The compact body leaves room for levers and switches.
• Wiring connects to the vehicle power supply.

Do I need a separate cable or adapter?

• No, the unit has a standard USB port.
• Use the same cable you already carry for your phone.
• No brand-specific adapter is required.

Can it replace a power bank on long rides?

• Yes, since it draws energy from the vehicle battery.
• Charging continues as long as the supply stays on.
• There is nothing extra to pack or recharge overnight.

With a 12V-80V input window, a 5V 2A output and handlebar mounting, this converter turns almost any bike, scooter or motorcycle battery into a working USB source. Check your pack voltage against the 80V limit, wire it in, and your phone stays charged for the entire route.