Sur-Ron display compatibility: every Light Bee X and L1e, 2019 to 2026
Sur-Ron display compatibility in one line: FabiRide Dash Pro fits every stock Light Bee X and Light Bee L1e from 2019 to 2026, the 60 V bikes and the new 72 V Light Bee X, off-road or road-registered. It plugs into the harness already on your bike.
The short answer
Yes. If your Sur-Ron is a Light Bee X or a Light Bee L1e, Dash Pro fits it on the stock controller. That covers every model year from 2019 to 2026: the 60 V bikes up to 2025 and the 72 V Light Bee X of 2026. The off-road Light Bee X and the road-registered Light Bee L1e are both supported. On the 2026 72 V Light Bee X, Dash Pro also lets you change the bike's own settings and wheelie control in the app.
Fitting is plug and play. Dash Pro connects into the wiring harness your bike already has, so there is nothing to cut, splice, solder or reprogram, and taking it off leaves the bike exactly as it came from the factory.
Sur-Ron display compatibility by model year
Sur-Ron display compatibility is the same for every model year below. Not sure which one you have? The battery tells the generations apart: the 2026 Light Bee X runs at 72 V and has its own wheelie control, the bikes before it run at 60 V.
| Model year | Light Bee X (off-road) | Light Bee L1e (road-registered) | Battery |
|---|---|---|---|
| 2026 | Yes, plug and play | Yes, plug and play | 72 V |
| 2025 | Yes, plug and play | Yes, plug and play | 60 V |
| 2024 | Yes, plug and play | Yes, plug and play | 60 V |
| 2023 | Yes, plug and play | Yes, plug and play | 60 V |
| 2022 | Yes, plug and play | Yes, plug and play | 60 V |
| 2021 | Yes, plug and play | Yes, plug and play | 60 V |
| 2020 | Yes, plug and play | Yes, plug and play | 60 V |
| 2019 | Yes, plug and play | Yes, plug and play | 60 V |
Wheelie control and settings on the 2026 Light Bee X 72V
The 2026 Light Bee X 72V has wheelie control built into its stock controller, and Dash Pro puts it in the free My FabiRide app. There you switch wheelie control on or off, choose mode 1 or mode 2 and set the angle of each mode: 15 to 30° for mode 1 and 30 to 55° for mode 2.
The same switch and modes are on the display, one swipe from the riding screen, and a wheelie icon on the main screen shows when wheelie control is on. You can change it only with the bike standing still, and wheelie control is off again every time you turn the key, just as on the stock bike.
The app also changes the bike's own settings, the same ones the stock display offers: regenerative braking in six steps (off to strongest), throttle response in three steps, tilt protection, brake priority, auto hold and the charging current. They are saved in the bike, so they stay as you set them, and like wheelie control they are changed with the bike standing still.
The 60 V Light Bee X and L1e from 2019 to 2025 have no wheelie control on their stock controller, and Dash Pro leaves that controller's settings as they are. With an ASI, SiliXcon or VESC controller fitted, Dash Pro adds its own wheelie assist instead.
On every Light Bee from 2019 to 2026, Dash Pro also limits the speed and changes the power aggressiveness, and you can save both as riding modes of your own.
Plug and play: nothing to cut or splice
Dash Pro connects into your bike's own harness on every Light Bee from 2019 to 2026. Every plug is a ready-made connector, so fitting takes ordinary hand tools and no wiring skills.
-
Mount the displayClamp Dash Pro to the handlebar with the bracket in the box and fit the three-button remote under your left thumb.
-
Plug into your harnessUnplug the factory display and connect the Dash Pro harness to the bike's own connectors. Each plug fits one way only, and nothing is cut, stripped or soldered.
-
Switch on and pick your bikeDash Pro recognises the controller the first time it powers up. In the free My FabiRide app choose Sur-Ron, then Light Bee X, or Light Bee X 72V for a 2026 bike.
-
RideYour riding modes, speed limit and ride recording work from the first ride. Taking the display off later returns the bike to exactly how it came.
Watch the whole fit on a stock Light Bee X: Dash Pro install video on YouTube
Which harness to choose when you order
In the shop, choose SurRon as your bike and SurRon Light Bee (X, L1e) as the harness. It is the same choice for every model year from 2019 to 2026, for the 60 V and the 72 V bikes, off-road or road-registered.
If your Light Bee already runs an upgraded controller, choose that controller's brand instead, such as Torp, ASI, SiliXcon or VESC, and the harness made for it. Running an EBMX controller? Write to us before ordering.
What else you get on the bars
25, 45 km/h or any limit
Hold the bike to 25 km/h for a learner, 45 km/h for the road or any number of your own, each with power aggressiveness control to match. You lift it in the app, and holding three buttons for two seconds puts it back.
Limits for every rider
Give a younger or newer rider their own speed limits and power aggressiveness control on the same bike. They live on the bike, so turning their phone off does not lift them, and you can raise them from anywhere.
Music, calls and crash alerts
Track and artist on the screen, calls answered from the bars, group voice with your crew, and an SOS message with your location if the display detects a crash and you do not cancel it.
What about the Sur-Ron Ultra Bee?
The Ultra Bee is a different bike with a different factory controller, and Dash Pro does not support that controller yet.
Dash Pro does fit an Ultra Bee that runs a Torp, EBMX, ASI or VESC controller. The Ultra Bee page explains what you get on each one.
Your Light Bee, 2019 to 2026, run from the bars
FabiRide Dash Pro plugs into the harness your Sur-Ron already has. 24 month warranty, shipped worldwide.
Sur-Ron display compatibility questions
Is Dash Pro a display for the 2026 Sur-Ron Light Bee X 72V?
Yes. The 72 V Light Bee X is supported on its stock controller and plugs into the bike's own harness just like the earlier bikes. During setup in the app, choose Light Bee X 72V.
Can I adjust wheelie control on the 2026 Light Bee X 72V?
Yes. Dash Pro gives you the bike's own wheelie control: switch it on or off, choose mode 1 or mode 2 and set the angle of each mode in the My FabiRide app or on the display, with the bike standing still.
Does it fit an older Light Bee X from 2019 or 2020?
Yes. Every Light Bee X and Light Bee L1e from 2019 to 2026 is supported on the stock controller, with the same harness and nothing to cut.
Does it work on the road-registered Light Bee L1e?
Yes. The Light Bee L1e uses the same factory controller and harness as the off-road Light Bee X, so Dash Pro fits it the same way and gives it the same features.
Do I have to cut or splice any wires?
No. Dash Pro connects into your bike's existing harness with ready-made plugs. Nothing is cut, spliced, soldered or reprogrammed, and removing it returns the bike to stock.
Which harness do I order for my Sur-Ron?
Choose SurRon as the bike, then SurRon Light Bee (X, L1e) as the harness. It is the same harness for every Light Bee X and L1e from 2019 to 2026.
Does it fit the Sur-Ron Ultra Bee?
Not on the Ultra Bee's factory controller yet. With a Torp, EBMX, ASI or VESC controller fitted, it does.
