This 38 cm stainless steel battery box is a protective metal enclosure built for the Sur-Ron Light Bee L1E, the Sur-Ron Light Bee X and the Talaria Sting. It shields the battery pack from impacts, mud and general trail abuse. The housing and the lid are both formed from stainless steel. Overall height measures roughly 38 cm.
The kit arrives with a removable lid, a carry strap, 8 bolts and a cable entry grommet. Every part you need for a tidy install is therefore included in the box. Screen units and charge or discharge connectors are sold separately.
This is an aftermarket part rather than a factory component. As a result, it also suits custom-assembled battery packs. Any pack up to roughly 38 cm tall will fit, provided it matches the basic internal width and depth. Measure your pack before ordering.
Key Benefits
- Stainless steel housing – resists stone strikes and stays straight after hard off-road landings.
- ~38 cm height – the main sizing figure to check when matching a battery pack to this enclosure.
- Removable lid – gives quick access to the pack for wiring checks and routine maintenance.
- Carry strap handle – makes lifting the pack in and out of the frame far easier.
- Cable entry grommet – seals the outlet opening and cuts down on mud and moisture ingress.
- 8 bolts supplied – bolted fixing points allow a clean, repeatable mounting job.
- Custom pack compatibility – accepts self-built battery packs that meet the internal dimensions.
- Single defined cable route – wiring exits through one opening instead of a loose gap.
Who Is This Battery Box For?
This enclosure suits owners of the Sur-Ron Light Bee L1E and the Sur-Ron Light Bee X, plus riders of the Talaria Sting. All three are lightweight electric dirt bikes with a removable battery pack. Before buying, check your own pack dimensions and connector type against the box.
The second group is riders who build their own battery packs. A self-assembled pack will fit when its height is around 38 cm or less. In addition, the base width and depth need to line up with the internal space.
Typical use cases include trail riding, motocross track sessions and daily battery removal for charging. The strap simplifies pulling the pack out of the frame. Consequently, the box works well for anyone who removes their battery often.
What’s in the Box?
- Battery enclosure – roughly 38 cm tall, stainless steel construction.
- Lid – removable, also stainless steel.
- Strap handle – for carrying and for lifting the pack out.
- 8 bolts – for mounting the enclosure.
- Cable outlet grommet – seals the wiring entry point.
A display screen and the charge or discharge connectors are not included. Those items are purchased separately.
Technical Specifications
| Product type | Battery box (enclosure) |
|---|---|
| Height | ~38 cm |
| Material | Metal – stainless steel (body and lid) |
| Sealing | Grommet for the outlet cable |
| Mounting | Bolted fixing points, 8 bolts included |
| Lid | Removable |
| Carrying | Strap handle |
| Compatibility | Sur-Ron Light Bee L1E / X, Talaria Sting, custom battery packs |
| Not included | Screen, charge / discharge connectors |
Why Choose This 38 cm Enclosure?
Unlike plastic housings, this box is made from stainless steel. The metal absorbs rock strikes without deforming after a crash. Your battery pack therefore stays put even after a heavy hit.
The second difference is the considered cable routing. Instead of an open hole, a grommet reduces how much mud and moisture reaches the wiring. That said, the box is not hermetically sealed, so avoid prolonged direct water exposure.
Third comes the carry strap. It lets you pull the battery pack out without reaching for tools. Furthermore, it helps riders who bring the battery indoors to charge each day.
Frequently Asked Questions
Does this battery box fit a Sur-Ron Light Bee L1E and X?
- Yes, the enclosure is designed for both Sur-Ron Light Bee L1E and Light Bee X frames.
- Check your battery pack height and connector layout before ordering.
Is it compatible with the Talaria Sting?
- Yes, the Talaria Sting is one of the two model families this box targets.
- Both bikes use a removable pack, which the strap handle helps you extract.
What material is the enclosure made from?
- Stainless steel forms both the main body and the removable lid.
- Metal construction resists the deformation common in off-road riding.
Can I use it with a custom-built battery pack?
- Yes, provided the pack height stays at roughly 38 cm or below.
- The base width and depth also need to match the internal dimensions.
Is the box waterproof?
- No. The grommet seals the cable outlet and limits mud and moisture entry.
- Avoid prolonged direct water exposure, since the enclosure is not hermetic.
Does the kit include a screen or connectors?
- No. Screens and charge or discharge connectors are bought separately.
- You do receive the lid, strap, 8 bolts and the cable entry grommet.
How is the enclosure mounted?
- Through bolted fixing points, using the 8 bolts supplied in the kit.
- Wiring exits through one defined cable entry for a tidy layout.
Installation Tips
Before fitting, measure the height, width and depth of your battery pack. Note the connector positions as well. Then verify polarity and connector compatibility, particularly when you run QS8 plugs. Finally, route the outlet cable through the grommet so the seal sits flush.
A stainless steel enclosure at this height covers both factory Sur-Ron and Talaria packs and many self-built ones. With the lid, strap, bolts and grommet supplied, you can mount it, remove the pack daily and ride rough terrain without worrying about the battery underneath.
There are no reviews yet.