Sur-Ron OEM Throttle Grip (Hall Sensor) – Light Bee X / L1e

The Sur-Ron OEM throttle grip is the factory Hall sensor throttle assembly built for the Sur-Ron Light Bee X and the Sur-Ron Light Bee L1e electric motorcycles. It mounts on the right side of the handlebar, exactly where the factory unit sits. Furthermore, it connects to the standard Sur-Ron wiring harness through the original OEM plug.

This throttle is fully electronic. There is no mechanical cable and no slide mechanism inside it. Instead, a Hall sensor varies the output signal according to the twist angle of the grip. As a result, the signal travels straight to the factory Sur-Ron controller and power builds smoothly, without steps or lag.

Installation requires no soldering and no cutting of wires. The connector matches the factory harness, so adapters are unnecessary. In short, this is a genuine plug and play replacement for riders restoring stock control feel.

Key Benefits

• OEM quality and fitment – a genuine Sur-Ron part that works without adaptation or rework.
• Hall sensor control – the signal is formed electronically, so throttle response stays accurate and smooth.
• Proportional response – power rises evenly in line with the twist angle of the grip.
• Original connector – the factory Sur-Ron plug joins the standard harness with no soldering.
• Vibration resistance – the construction handles daily riding and off-road loads.
• Fast installation – the plug-and-play connection removes the need for extra modifications.
• Standard layout – the grip is designed for the right handlebar side, just like the factory setup.
• Reliable return to zero – the grip springs back freely, which keeps control predictable.

Who Is This Throttle For?

This throttle grip fits two models. The first is the Sur-Ron Light Bee X, the off-road version. The second is the Sur-Ron Light Bee L1e, the road-legal homologated version. In both cases a factory OEM Sur-Ron controller is required.

Owners typically choose it when the original throttle has worn out. It is also the right fix when the grip starts sticking or no longer returns to the zero position. Riders rebuilding a stock Light Bee configuration after a crash or an off-road fall will find it restores the original setup directly.

Compatibility with aftermarket controllers can vary. In that case an adapter may be needed, because the pin layout is often different. Therefore, riders on non-OEM controllers should check their connector before ordering.

Package Contents

• 1× Sur-Ron throttle grip with OEM connector

Additional accessories are not included in the set.

Technical Specifications

Why Choose the Genuine Sur-Ron Throttle Grip?

The difference from aftermarket units starts at the connector. Here you get the factory Sur-Ron plug, so the harness never needs cutting or soldering. Aftermarket throttles, by contrast, often demand an adapter or rewiring of individual pins.

The second difference is the signal characteristic. This Hall sensor is matched to the factory Sur-Ron controller, so the power curve follows the original one. Consequently, acceleration stays as predictable as it was on a new bike, and there are no dead spots through the twist range.

Third, the construction is built for off-road vibration and daily use. That matters for Light Bee X owners who ride rough surfaces regularly. The grip also returns freely to zero, which keeps low-speed control manageable on technical trails.

Installation Notes

• Switch off the power to the motorcycle before connecting the throttle.
• Check the free movement of the grip and confirm it returns to zero without resistance.
• Route the wires away from moving parts and hot surfaces.
• Make sure the connector seats fully and no wires are pinched.

Frequently Asked Questions

Does this throttle fit the Sur-Ron Light Bee X?

• Yes, this throttle grip is made for the Sur-Ron Light Bee X.
• A factory OEM Sur-Ron controller is required.
• It mounts on the right side of the handlebar.

Is it compatible with the Sur-Ron Light Bee L1e?

• Yes, the Light Bee L1e is the second supported model.
• The L1e is the road-legal homologated version.
• The connector is the factory Sur-Ron type in both cases.

Will it work with a non-OEM controller?

• The grip is designed for the factory Sur-Ron controller.
• Compatibility with aftermarket controllers can vary.
• An adapter may be required, since pin layouts differ.

Does installation require soldering?

• No soldering and no wire cutting are needed.
• The OEM plug matches the standard harness directly.
• Simply connect it and ride.

How does a Hall sensor throttle work?

• The unit is fully electronic, with no cable or slide mechanism.
• The sensor changes the signal based on the twist angle.
• Power therefore rises evenly, without jumps or delay.

Which side of the handlebar does it mount on?

• The right side, following the standard factory layout.
• No repositioning of other controls is needed.

What comes in the box?

• One Sur-Ron throttle grip with the OEM connector.
• Additional accessories are not included.

Why is my old throttle sticking?

• Wear and off-road grit can stop the grip returning to zero.
• A worn unit makes the power delivery unpredictable.
• Replacing it with the OEM part restores the original response.

For Light Bee X and Light Bee L1e riders running the factory controller, this genuine throttle grip brings back stock behaviour in minutes. The Hall sensor delivers a proportional signal, the OEM plug drops straight onto the harness, and the grip returns cleanly to zero after every twist.