These footpeg mounts are CNC-machined brackets built for the Sur-Ron Light Bee L1E, Light Bee X, Talaria Sting and Talaria 3X electric dirt bikes. They are cut from 7075-T6 aluminium alloy and finished with an anodised surface. Moreover, they bolt straight into the original (OEM) mounting points, so no frame modification is needed.
The bracket is the part of the frame that your footpegs thread into. Consequently, it carries the full load every time you ride standing up. Its stiffness is what you feel underfoot on rough ground. A soft or flexing bracket translates directly into a vague, unsettled platform.
7075-T6 is one of the hardest aluminium alloys available. It offers an unusually high strength-to-weight ratio. Therefore these brackets absorb off-road loads and landing impacts without adding surplus mass to the bike.
Key Benefits
- 7075-T6 aluminium alloy – a hard, deformation-resistant and long-lasting material choice.
- Precision CNC machining – tighter tolerances mean a steadier foot platform and less play in the joint.
- Light yet strong – reduces unsprung mass without giving up durability.
- Plug-and-play fitment – matches the OEM mounting points, so the frame stays untouched.
- Impact resistance – copes better with trail abuse and hard landings after jumps.
- Anodised finish – an electrochemical surface treatment rather than paint.
- Sharper control – a solid base when you shift your weight while standing.
- Clean factory look – the shape sits naturally alongside the frame and pegs.
Who These Brackets Are For
These brackets suit the Sur-Ron Light Bee L1E and the Sur-Ron Light Bee X. In addition, they fit the Talaria Sting and the Talaria 3X electric dirt bike. Before installation, check the peg axle position and bolt layout on your particular model year.
They are aimed at riders who tackle trails in a standing position. Likewise, they suit anyone who jumps regularly and loads the peg assembly hard. Under that kind of use, factory brackets can bend or develop play over time.
They also appeal to riders building a CNC-parts setup. For example, if you are swapping to aftermarket pegs, it makes sense to refresh the brackets at the same time. That way the whole assembly stays consistent and solid.
Technical Specifications
| Material | 7075-T6 aluminium alloy |
| Machining | CNC milling |
| Type | Footpeg mounts (pair or single, depending on the set) |
| Finish | Anodised coating (colours may vary by availability) |
| Installation | OEM mounting points, no modification required |
| Compatibility | Sur-Ron Light Bee L1E, Light Bee X |
| Compatibility | Talaria Sting, Talaria 3X |
| Hardware | Original bolts can be reused |
| Intended use | Off-road riding, jumps, standing riding position |
Why Choose These Footpeg Mounts
Stock brackets are frequently produced from softer materials. Here, 7075-T6 replaces those more common alloys. As a result, resistance to bending is noticeably higher at the same weight or less.
Accurate CNC machining also means smaller manufacturing deviations. Because of that, the peg axle seats more tightly and play in the assembly drops. Your foot platform then stays more stable over broken, rutted terrain.
Installation demands no drilling or cutting of the frame. The brackets thread directly into the original locations instead. Consequently, you can return to the standard configuration whenever you want.
Frequently Asked Questions
Which models are these footpeg mounts made for?
- Sur-Ron Light Bee L1E
- Sur-Ron Light Bee X
- Talaria Sting
- Talaria 3X
Do these brackets fit the Sur-Ron Light Bee X?
- Yes, the Light Bee X is among the compatible models.
- Installation uses the original OEM mounting points.
- Check the peg axle and bolt layout before you start.
Will they work with the Talaria Sting and 3X?
- Yes, both the Talaria Sting and Talaria 3X are covered.
- The brackets locate in the factory mounting positions.
- No frame drilling or cutting is involved.
Are they compatible with original footpegs?
- Yes, they are designed around the OEM mounting system.
- They also accept most aftermarket footpegs.
Do I need extra bolts?
- In most cases the original fasteners fit without issue.
- If your bolts are worn, fresh hardware is recommended.
What material are these brackets made from?
- 7075-T6 aluminium alloy.
- The T6 designation refers to the temper condition.
- This alloy delivers a very high strength-to-weight ratio.
What finish do they have?
- An anodised surface, applied electrochemically.
- It is a surface treatment rather than a layer of paint.
- Available colours depend on current stock.
Is the installation reversible?
- Yes, because the frame is never altered.
- The factory brackets can be refitted at any point.
A footpeg bracket is a small part with a large job. It anchors your only solid contact with the bike when you stand on the pegs. With 7075-T6 material, CNC tolerances and direct OEM fitment, these mounts keep that connection tight on your Sur-Ron Light Bee or Talaria.
There are no reviews yet.