FabiRide 7075-T6 Rear Sprocket – Sur-Ron Light Bee, Talaria, E Ride Pro

The FabiRide rear sprocket is a 7075-T6 aluminium drive sprocket built for the Sur-Ron Light Bee, Talaria Sting, Talaria 3X and E Ride Pro electric dirt bikes. Every unit is CNC machined from aerospace-grade alloy and finished in a black anodised coating. Six tooth counts are available: 48T, 52T, 54T, 56T, 58T and 60T.

The sprocket runs on a standard 420 chain and uses the factory spacers. No modifications are needed. It bolts straight onto the stock rear hub, so a gearing change takes minutes rather than an afternoon in the workshop.

Because the alloy is both harder and lighter than softer aluminium types, the sprocket trims rotating weight while it transfers power to the rear wheel. Riders gain sharper acceleration control on forest singletrack and on the motocross track alike. The evenly milled tooth profile also cuts noise and chain slap.

Key Benefits

• 7075-T6 aluminium – aerospace-grade alloy with a high strength-to-weight ratio and reduced risk of deformation.
• More torque at the wheel – optimised geometry delivers power to the rear wheel faster.
• Off-road durability – the hardened alloy resists impacts and wear on rough terrain.
• Lower unsprung mass – lighter rotating weight on the rear wheel improves agility.
• Smooth power delivery – the uniform tooth profile reduces noise and chain jumping.
• Precise CNC machining – accurately milled teeth repeat identically around the full circle for a longer service life.
• Stiffening spokes – the cut-out design saves weight while it holds structural strength.
• Black anodised finish – protects against corrosion and gives a consistent look.

Who Is This Sprocket For?

This rear sprocket fits the Sur-Ron Light Bee, Talaria Sting, Talaria 3X and E Ride Pro. All of these electric dirt bikes use a chain drive with one front and one rear sprocket. As a result, the part mounts directly with no conversion work.

Motocross and enduro riders get a race-ready component that stands up to hard laps. Trail and off-road riders gain better traction and control on loose or broken surfaces. For Sur-Ron and Talaria owners, it is a way to move power to the ground more efficiently without adding mass.

The tooth count changes the final drive ratio. More teeth mean stronger acceleration and better hill climbing, but a lower top speed. Fewer teeth work the other way: higher speed, less torque at the wheel. Choose the size that matches your terrain.

What’s in the Box

• Rear sprocket – 1 pc, in the tooth count you select.
• Chain and other accessories are sold separately.

Technical Specifications

Recommended Chain Link Count

Why Choose the FabiRide Rear Sprocket?

The first difference is the material. 7075-T6 is a harder and stiffer alloy than softer aluminium grades. Consequently, it handles wear better and weighs less at the same strength level.

The second difference is the production method. Teeth are milled on CNC machines, so the profile repeats accurately around the entire circumference. The chain therefore runs more evenly and the sprocket lasts longer.

The third difference is choice. Six tooth options from 48T to 60T let you tune the bike to your riding style. Swap to a taller count for technical climbs, or drop down for faster open sections.

Frequently Asked Questions

Does this sprocket fit the Sur-Ron Light Bee?

• Yes. It is designed for the Sur-Ron Light Bee and mounts using the factory spacers.
• No frame or hub modifications are required.

Is it compatible with the Talaria Sting and Talaria 3X?

• Yes. Both the Talaria Sting and Talaria 3X are supported, along with the E Ride Pro.
• All four models use a single front and single rear sprocket chain drive.

Which chain size do I need?

• The sprocket is made for a standard 420 chain.
• Link count depends on the tooth count and the bike – see the chain link table above.

What tooth counts are available?

• 48T, 52T, 54T, 56T, 58T and 60T.
• Higher counts favour acceleration and climbing; lower counts favour top speed.

Why is 7075-T6 aluminium better than standard alloy?

• It is harder and stiffer, so it resists wear and deformation more effectively.
• It also delivers the same strength at a lower weight.

Is a chain included?

• No. The package contains one rear sprocket in the tooth count you choose.
• Chains and other accessories are purchased separately.

Does the black finish wear off?

• The black anodised coating is bonded to the alloy and protects it against corrosion.
• It also keeps a consistent appearance across the drivetrain.

Will a lighter sprocket really change how the bike feels?

• Yes. Less rotating weight on the rear wheel lowers unsprung mass and improves agility.
• The even tooth profile additionally reduces chain jumping and drivetrain noise.

Pick your tooth count, match the chain links from the table, and bolt the FabiRide sprocket onto your Sur-Ron, Talaria or E Ride Pro. The 7075-T6 alloy, CNC-milled teeth and black anodised finish work together for a drivetrain that stays quiet, precise and ready for the next ride.