10×2 Street Tyre for Electric Scooters – Inokim OX, OXO, Zero

This 10×2 inch street tyre is a replacement outer tyre for electric scooters. It fits the Inokim OX, the Inokim OXO and the Zero series. In addition, it suits many other scooters running 10 inch wheels. The tyre measures 10×2 inches, which is the standard size on these models.

The tread pattern is a street pattern. In other words, the surface is smooth and shaped for city riding. Because of that, the tyre covers asphalt evenly and rolls with less effort than a knobby off-road tyre. Furthermore, the same tyre works on both the front and the rear wheel, so one part covers either axle.

This is a spare part sold as a single outer tyre. Therefore, no rim and no motor are included. Riders fit it by removing the wheel and pulling the worn rubber off the existing rim. As a result, the wheel hub and motor stay in place while only the rubber is renewed.

Key Benefits

• 10×2 inch sizing – the standard electric scooter measurement used on Inokim OX, OXO and Zero models.
• Street tread pattern – the smooth surface gives a wider contact area on asphalt.
• Lower rolling resistance – a flat tread rolls more easily than a knobby off-road tyre.
• Quieter ride – the street pattern generates less noise on hard surfaces than an off-road tyre.
• Front or rear fitment – the same tyre is used on either axle, so stock keeping stays simple.
• Broad compatibility – suits Inokim OX, OXO, Zero and other 10 inch scooters.
• Spare part economy – renews a worn wheel without replacing the whole wheel assembly.
• Straightforward fitting – mounts into a standard 10 inch scooter rim.

Who Is This Tyre For

This tyre is made for owners of the Inokim OX, Inokim OXO and Zero series electric scooters. Moreover, it fits many other scooters whose wheels use the 10×2 inch size. Before ordering, check the size marking printed on the sidewall of your old tyre. That marking confirms the fitment straight away.

The product suits riders who commute through the city every day. Equally, it works for workshops and service centres that change customer tyres regularly. Typical cases include a worn tread, rubber damaged after a puncture, or a switch from an off-road tyre to a street one.

Keep the intended surface in mind. This tyre is built for asphalt and other hard surfaces. For mud, gravel and sand, an off-road tyre remains the better choice. Consequently, this model makes most sense for riders who stay on city streets and cycle paths.

What’s In The Box

• 1 × outer tyre, 10×2 inches, street tread
• Sold without a rim
• Sold without a motor

Technical Specifications

Why Choose A 10×2 Street Tyre

The main difference from an off-road tyre lies in the tread pattern. Off-road rubber carries knobs and deep grooves, so the contact area on asphalt is smaller. A street tyre presents a flat surface instead and covers the road more evenly. That difference shows up as easier rolling and reduced riding noise.

Secondly, 10×2 inches is a size specific to scooters. It does not overlap with bicycle or motorcycle tyre dimensions. For that reason, this tyre seats directly into Inokim OX, OXO and Zero rims without adapters.

Thirdly, this is a separate tyre rather than a complete wheel. When the tread wears down, only the rubber gets replaced. Meanwhile the rim and the motor stay exactly as they are, which keeps a routine repair simple.

Frequently Asked Questions

Does this tyre fit the Inokim OX and OXO?

• The 10×2 inch street tyre fits Inokim OX and Inokim OXO electric scooters.
• The same tyre is used for the front wheel and the rear wheel.

Which models is this tyre made for?

• It is made for Inokim OX, Inokim OXO and Zero series scooters.
• It also fits many other scooters with 10×2 inch wheels.
• Check the marking on the sidewall of your old tyre to confirm the size.

What does a street tyre mean?

• A street tyre has a smooth tread designed for road use.
• It is intended for asphalt and other hard surfaces.
• It is the opposite of an off-road tyre, whose tread is knobby.

Is an inner tube supplied with it?

• The product is a single outer tyre.
• No rim and no motor are included in the delivery.

Can I use it on gravel or sand?

• The tread is designed for asphalt and other hard surfaces.
• For mud, gravel and sand, an off-road tyre is the better option.

Do I need to change both tyres at once?

• One tyre is supplied per order.
• The same part fits the front or the rear wheel, so you can renew one axle at a time.

How is the tyre replaced?

• Remove the wheel from the scooter.
• Take the old rubber off the rim.
• Mount the new tyre into the standard 10 inch scooter rim.

Riders who cover city streets and cycle paths will get the most from this tread pattern. Check the 10×2 marking on your current tyre, then order a single replacement to renew a worn Inokim OX, OXO or Zero wheel.