Sur-Ron Seat Riser Kit Black Edition – CNC Aluminium, +50 mm

The Sur-Ron seat riser kit in Black Edition trim is a set of CNC-machined aluminium risers for the Sur-Ron Light Bee X, Sur-Ron Light Bee L1e, Segway X160 and Segway X260 electric dirt bikes. The kit lifts the seat 50 mm upwards and shifts it 30 mm rearward. As a result, taller riders finally get a cockpit that matches their build.

Each riser is milled on a CNC machine from premium aluminium billet and finished in black. Therefore the hardware blends in with the factory Sur-Ron black components rather than standing out. The risers mount between the seat and the frame mounting points, so fitment follows the original bolt pattern.

Because only the seat position changes, the suspension and ground clearance stay exactly as they were. In other words, this is a pure ergonomics modification (seat riser kit) that leaves the bike geometry untouched. The latest version has also been redesigned: extra material volume was added in the specific load-bearing zones, making these risers stronger and more durable than the earlier design.

Key Benefits

• 50 mm seat lift – the knee joint angle opens up, so your legs sit far less compressed on longer rides.
• 30 mm rearward shift – more room appears between the seat and the handlebars for a roomier riding triangle.
• Built for riders 170 cm and taller – the seating position is matched to real rider height instead of the stock compromise.
• CNC-machined aluminium – every riser is milled on a CNC machine from premium aluminium.
• Reinforced load zones – the updated version adds material volume in specific areas, which increases durability.
• Easier standing transitions – the higher seat height helps you move onto the foot pegs faster on trails.
• Four-model compatibility – one kit covers Light Bee X, Light Bee L1e, Segway X160 and Segway X260.
• Black Edition finish – the black finish matches the original Sur-Ron black components.

Who Is This Kit For?

This riser set is designed for four electric dirt bikes: the Sur-Ron Light Bee X, the Sur-Ron Light Bee L1e, the Segway X160 and the Segway X260. The Light Bee X is the off-road model, while the Light Bee L1e is the road-homologated L1e class version. Both share the same seat and frame mounting layout.

The Segway X160 and X260 are electric dirt bikes with a comparable frame and seat arrangement. Consequently, the same risers bolt straight onto them. One kit therefore covers a garage running mixed brands.

Above all, these risers are aimed at riders from 170 cm upwards. The standard Sur-Ron seat sits too low for that height, so the knees stay sharply bent and longer rides become tiring. Raising the seat by 50 mm restores a far more natural leg position. In addition, the kit suits anyone who rides off-road and spends a lot of time standing on the foot pegs, since the higher seat makes the switch from sitting to standing quicker and control on the trail more precise.

Technical Specifications

Why Choose the Black Edition Risers?

This kit is a revised version rather than the original design. Extra aluminium volume sits in the reinforced areas, so the risers cope better with off-road loads. That difference matters most on rough trails where the seat mounts take repeated hits.

Furthermore, every part is milled on a CNC machine from an aluminium billet. The mounting points therefore match the original Sur-Ron and Segway dimensions without modification. A single kit also covers four different bike models, which simplifies the choice considerably.

If you stand 170 cm or taller, seat risers should be your first and most important Sur-Ron modification. This change does not alter the suspension or ground clearance either. The bike geometry stays original while the riding position improves.

Frequently Asked Questions

How much do these seat risers lift the seat?

• The seat is raised 50 mm upwards.
• It is also shifted 30 mm rearward.
• Suspension and ground clearance remain unchanged.

Do these risers fit the Sur-Ron Light Bee X?

• Yes, the kit is designed for the Light Bee X off-road model.
• It uses the standard seat and frame mounting points.

Are they compatible with the Segway X160 and X260?

• Yes, both Segway models are covered by this kit.
• Their frame and seat layout matches the Sur-Ron arrangement.

Will they fit the road-legal Light Bee L1e?

• Yes, the L1e class homologated version is supported.
• The mounting points are identical to the Light Bee X.

What rider height are the risers made for?

• They are recommended for riders from 170 cm upwards.
• The 50 mm lift opens the knee angle for taller legs.

What material are the risers made from?

• Premium aluminium, milled on a CNC machine.
• The Black Edition carries a black finish.

How does this version differ from the earlier one?

• More material volume was added in specific load-bearing zones.
• The result is a stronger and more durable riser.

Does the kit change the suspension setup?

• No, the risers only alter seat height and position.
• They mount between the seat and the frame mounting points.

For riders of 170 cm and above on a Sur-Ron Light Bee X, Light Bee L1e, Segway X160 or Segway X260, this Black Edition set turns a cramped seating position into a natural one. The 50 mm lift and 30 mm rearward shift open up the riding triangle, while the reinforced CNC aluminium construction handles trail duty and keeps the original bike geometry intact.