DOC. EN / TALARIA‑REPAIR KAUNAS · EUROPE SERVICE SPECIFICATION · 2026
FabiRide · Electric motorcycle service

Talaria repairMail-in service, parts shipped out

Talaria repairs are carried out in the FabiRide workshop in Kaunas: we rebuild Talaria Sting R, MX3 and MX4 motors, eBMX controllers, suspension, brakes, wheels and wiring harnesses, and we make QS8 battery connector adapters. Send us the bike or the part, or order components and we ship them. We quote after fault diagnosis and warrant the work we do.

Workshop
S. Raštikio g. 28, Kaunas
Models
Sting · Sting R · MX3 · MX4
Opening hours
Mon-Fri 10:00-18:00
Warranty
Included
Talaria Sting - FabiRide workshop, Kaunas
FIG. 01 - Talaria Sting RRoad-legal / L1e
01 What we repair

Complete Talaria service - from motor to electronics

Talaria electric motorcycles combine mechanics with complex electronics. In the FabiRide workshop in Kaunas every assembly is repaired under one roof - you send one bike or one part to one place, not to three different shops.

01

Motor repair

Inspection and replacement of mid-drive motor bearings, belt or chain, stator and rotor. We cure unwanted noise, vibration and power loss.

02

Controller diagnostics and tuning

Fault-code reading, parameter tuning and replacement for eBMX and other controllers. We program ASI and SiliXcon controllers in-house.

03

Suspension service

Seal and oil replacement plus setup for front forks and rear shock. We bring back smooth, safe off-road handling.

04

Brake system

Hydraulic brake pad and disc replacement, system bleeding, fluid change. We deliver stable, predictable braking.

05

Wheels and tyres

Wheel bearing and spoke repair, tyre replacement and balancing, rear axle inspection and refurbishment.

06

QS8 connectors and adapters

High-current QS8 battery connectors, 6 AWG power leads and our own QS8 adapter for compatibility with Sur-Ron type batteries.

07

Wiring and electrics

Repair and upgrade of the wiring harness, throttle (Domino), lighting, display and road-legal installations. We find and eliminate short circuits.

Don’t see your fault?

We also work on other Talaria models and on Sur-Ron, Eride Pro and Storm Bee. Describe the problem - we’ll tell you whether we can help.

Ask now
02 Models

Which Talaria models we repair

Talaria Sting and Sting R run a 60 V system, while the newer MX generation has technical quirks of its own. Below are the most common repair jobs for each model in the FabiRide workshop.

Talaria modelClass / purposeMost common repair jobs
Sting RRoad-legal (L1e) 60 VController diagnostics, suspension service, road-legal lighting install, QS8 connectors
StingEnduro 60 VMotor bearings, brake refresh, controller tuning
MX3EnduroMotor and suspension service, wiring harness repair
MX4Enduro (newer generation)Controller tuning, battery connectors, brake and suspension service

// We service other Talaria variants too - ask about your exact model on +370 604 15255.

03 How a repair works

A clear process with no surprises

From the first message to the bike going back out - every step is agreed with you, and work starts only once you approve the quote.

1

Consultation

You describe the fault by phone or email and we assess the situation together.

2

Diagnostics

We check the battery, controller, connectors and mechanics and pin down the exact cause.

3

Quote

We set out the scope and cost of labour and parts. Work begins only after you approve it.

4

Repair

We carry out the work, fit the parts and test the bike under real conditions.

5

Return

We ship the bike or part back, explain what was done and warrant the work.

03.1 Typical work packages
Work packageWhat it covers
Motor repairBearings, belt / chain, stator and rotor inspection
Controller diagnosticsFault-code reading, eBMX tuning, replacement
Suspension serviceFork and shock seals, oil, setup
Brake systemPads, discs, brake fluid change and bleeding
Wheels and tyresBearings, spokes, tyre replacement and balancing
Wiring and electricsHarness, QS8 connectors, lighting, throttle
04 Cost and warranty

Transparent cost - only after diagnosis

The cost of a Talaria repair depends on the type of fault, the parts required and the amount of labour, so there is no flat rate. We give an exact quote after diagnosis - that way there are no unexpected charges.

What drives the cost

  • Nature of the fault - electronics, mechanics or suspension
  • Whether original or refurbished / equivalent parts are used
  • Parts availability and sourcing
  • Whether extra tuning or upgrades are done at the same time

What is included

  • Fault diagnosis and a clear written description of it
  • Skilled assembly and installation
  • Final testing before the bike is dispatched
● Warranty on the work carried out and the parts fitted
05 QS8 connectors

QS8 battery connectors and adapters for Talaria

A weak or overheating battery connector is one of the most common causes of power loss. FabiRide makes and fits high-current QS8 connectors and 6 AWG power leads, and our QS8 adapter lets you run Sur-Ron standard batteries on a Talaria Sting. Order online and we ship.

QS8 high-current connector 6 AWG power lead QS8 → Talaria Sting adapter Sur-Ron compatibility
QS8 6AWG power lead for Sur-Ron and Talaria - FabiRide, Kaunas
FIG. 02 - QS8 6 AWG power leadSur-Ron / Talaria
06 Why FabiRide

A workshop electric motorcycle riders trust

We are not a reseller handing out remote advice - we run a real workshop in Kaunas with deep hands-on experience of Talaria and other electric motorcycle platforms.

1st integration

The first workshop in Lithuania to officially integrate ASI into Sur-Ron and Talaria.

MCU

We program ASI and SiliXcon controllers in-house.

Direct

Among the first in Lithuania to import Talaria straight from the factory.

Kaunas

A real workshop at S. Raštikio g. 28 - we ship across the EU and worldwide.

07 FAQ

Frequently asked questions

How much does a Talaria repair cost?

The cost of a Talaria repair depends on the type of fault, the price of parts and the amount of labour, so there is no flat rate. We give an exact quote after diagnosis in the FabiRide workshop in Kaunas - call +370 604 15255 or email us, and we’ll arrange for the bike or the part to be sent in. The work carried out and the parts fitted are covered by warranty.

How does a Talaria repair work?

Most Talaria repairs are done to a scope agreed in advance. That scope depends on how complex the fault is and on parts availability - if a part has to be ordered in, we tell you beforehand.

Do you repair Talaria Sting R, MX3 and MX4?

Yes. FabiRide repairs all the popular Talaria models - Sting, Sting R, MX3 and MX4: motors, eBMX controllers, suspension, brakes, wheels and wiring. FabiRide was among the first in Lithuania to import Talaria motorcycles directly from the factory, so we have known these models since the very first batches.

My Talaria won’t switch on or won’t move - what should I do?

The usual causes are the battery connector, a controller fault or a damaged wiring harness. We run full diagnostics: battery, QS8 connectors, eBMX controller and throttle, and then issue a repair quote.

Can you tune or replace an eBMX controller?

Yes. We program and configure ASI and SiliXcon controllers in-house. We read fault codes, adjust parameters, or fit a new controller and match it properly to the bike.

What is the QS8 → Talaria adapter and why do I need it?

It is a connector adapter we manufacture ourselves, letting you plug QS8 type batteries (Sur-Ron standard, for example) into a Talaria Sting. Together with a 6 AWG power lead it gives a reliable high-current connection without overheating.

Do you accept Talaria repairs from other countries?

Yes. Customers send bikes and parts to our Kaunas workshop from across Europe and beyond, and we ship parts out to them. Call +370 604 15255 to arrange the details.

Get in touch

Need a Talaria repair? Let’s start with diagnostics.

Describe the fault by phone or email and send the bike or part in - we’ll come back with a quote and a repair plan. Parts ship across the EU and worldwide.

Phone
+370 604 15255
Email
info@fabiride.com
Address
S. Raštikio g. 28, Kaunas
Opening hours
Mon-Fri 10:00-18:00
FabiRideTalaria repair · KaunasSur-Ron · Talaria · Eride ProShipping across the EU and worldwide
Controllers (MCU)

Controllers we work with

We tune, program and replace the most advanced electric motorcycle motor controllers - in the FabiRide workshop in Kaunas. We work with most controllers on the market, and ASI BAC and SiliXcon controllers we program and match to any motor, so the whole system runs smoothly.

  • Torp TC500 2.X FOC motor controller - FabiRide, KaunasTorp TC500 2.X / TC1000 2.X FOCPlug-and-play power upgrade with Bluetooth tuning - from 25 kW (TC500) up to 60 kW (TC1000).
  • eBMX X-9000 V3 controller for Sur-Ron and Talaria - FabiRide, KaunaseBMX X-9000 V3VESC/FOC, up to 50 kW and up to 1600 A burst phase current, IP67 - for high-power builds.
  • SiliXcon controller for an electric motorcycle - FabiRide, KaunasSiliXcon SL / SC / AMRuns on its own platform with the manufacturer’s software. We program and match it to the motor - 18-36 kW.
  • ASI BAC8000 controller for an electric motorcycle - FabiRide, KaunasASI BAC4000 / BAC8000Race-grade FOC controllers, 17-32 kW. We program and match them to any motor.

Models: Talaria Sting R · MX3 · MX4 · MX5

Search for products

Back to Top
Product has been added to your cart
Compare (0)