10×3 Off-Road Scooter Tyre for Inokim OX, OXO and Zero

33,88    incl. VAT

Only left in stock

A 10×3 inch off-road tyre for Inokim OX, OXO, Zero and other electric scooters using the same size. The coarse, knobby tread bites into gravel, dirt and grass, while the wide 3 inch profile increases the contact patch and soaks up bumps. This is a spare part – the tyre only, with no rim. It mounts straight onto your existing scooter wheel, so you replace the worn rubber and keep the original rim.

Buy it now

This 10×3 off-road scooter tyre is a knobby replacement tyre built for Inokim OX, Inokim OXO and Zero electric scooters. It also fits many other models that run the same 10×3 inch size. The coarse, blocky tread pattern is shaped for riding away from tarmac.

This listing is for the tyre only. It is a spare part (replacement part), not a complete wheel with a rim. The tyre mounts onto your existing scooter rim, so only the worn rubber is replaced. Your original rim and hub stay exactly as they are.

10×3 inches is the most widely used “fat” tyre size on more powerful electric scooters. That is why this tyre suits far more than the Inokim OX and OXO. Riders on gravel tracks, forest paths, park trails and grass will get the most from it. It also works well on wet or muddy ground thanks to the aggressive tread.

Key Benefits

  • Off-road tread – the knobby pattern bites into gravel, dirt and grass.
  • 10×3 inch sizing – the standard measurement for Inokim OX, OXO and Zero scooters.
  • Wide 3 inch profile – increases the contact patch on uneven ground.
  • Broad model compatibility – fits other scooters that use 10×3 inch tyres.
  • Sold as a spare part – replace the tyre alone, without buying a whole wheel.
  • Better grip off-road – the toothed tread holds on mud far better than a smooth city tread.
  • Higher air volume – a 10×3 tyre absorbs more impacts than narrower 8 inch tyres.
  • Fits your current rim – no need to change the hub or the rim.

Who Is This Tyre For?

This 10×3 off-road tyre is made for the Inokim OX, the Inokim OXO and the Zero series of electric scooters. Inokim is an electric scooter manufacturer, and both the OX and OXO run this tyre size. Zero here refers to the electric scooter line, not the motorcycle brand.

Beyond those models, it suits any scooter that already uses a 10×3 inch tyre. Because this is such a common size, the range of compatible machines is wide. Therefore, check the sidewall of your old tyre before ordering. It must be marked 10×3 inches.

It is equally useful as a straightforward wear item. When the old tread is worn smooth or the tyre has been punctured, only the rubber gets replaced. Riders who mix tarmac with gravel roads, woodland tracks and grass will feel the difference most.

What’s in the Box

  • 1 x 10×3 inch off-road scooter tyre
  • Rim not included
  • Hub not included

Technical Specifications

Product type Electric scooter tyre
Size 10×3 inches
Tread type Off-road, knobby tread
Intended use Off-road riding – gravel, dirt, grass
Compatible models Inokim OX, Inokim OXO, Zero and other 10×3 inch scooters
Category Electric scooter parts, scooter tyres
Included Tyre only (no rim)

Why Choose a 10×3 Off-Road Tyre?

City scooter tyres use a smooth tread. Off the pavement, they slip. This 10×3 tyre carries a toothed tread instead, so it digs into loose and uneven surfaces. That difference shows up quickly on gravel and wet grass.

The 3 inch width also lets you run lower pressure. As a result, the tyre soaks up bumps more effectively. That matters on the Inokim OX and OXO, which are frequently ridden in mixed conditions rather than on smooth tarmac alone.

Finally, this is a standard size rather than a niche one. Replacing the tyre again later is therefore simple once the tread wears down. You keep the same rim and simply fit fresh rubber.

Frequently Asked Questions

Does this tyre fit the Inokim OX and OXO?

  • Yes, the 10×3 inch tyre fits both Inokim OX and Inokim OXO models.
  • Inokim is an electric scooter manufacturer.

Which models is this 10×3 tyre made for?

  • Inokim OX, Inokim OXO and Zero series electric scooters.
  • Also many other scooters running 10×3 inch tyres.
  • Zero here means the electric scooter line, not motorcycles.

Is this a tyre or a complete wheel?

  • This is the tyre – the rubber part that mounts onto a rim.
  • The rim and hub are not included.

How does an off-road tyre differ from a city tyre?

  • An off-road tyre has a coarse, knobby tread.
  • A city tread is smoother and made for tarmac.
  • The toothed tread grips better on gravel, dirt and grass.

How do I check the size fits my scooter?

  • The size is printed on the sidewall of your old tyre.
  • It must read 10×3 inches.

Will a 10×3 tyre fit a bicycle?

  • No, this is an electric scooter tyre.
  • It is made for scooter rims such as Inokim OX, OXO and Zero.

When should I replace my scooter tyre?

  • When the tread blocks are worn down and off-road grip drops.
  • When the tyre is punctured or the sidewall is damaged.

Fitted to your existing rim, this 10×3 inch off-road tyre turns an Inokim OX, OXO or Zero into a scooter that handles gravel, dirt and grass with confidence. Check your sidewall marking, order the tread you need, and keep the rim you already own.

Customers reviews

There are no reviews yet.

Be the first to review “10×3 Off-Road Scooter Tyre for Inokim OX, OXO and Zero”

Your email address will not be published. Required fields are marked *


Search for products

Back to Top
Product has been added to your cart
Compare (0)