10×2.5 Inner Tube with Bent Valve – Inokim OX, OXO, Zero X10, VSETT

This 10×2.5 inner tube with a bent valve is a replacement air chamber for electric scooters running 10 inch tyres. It fits the Inokim OX, Inokim OXO, Zero X10 and VSETT models. In addition, it suits other electric scooters built around 10 inch wheels. The tube sits inside the tyre and holds the air pressure.

The defining feature is the valve shape. Instead of pointing straight out, the valve is bent and angled inward, exactly as shown in the photo. Ten inch scooter rims leave very little space around the hub. As a result, a straight valve often blocks the pump nozzle. The inward bend clears that obstruction and leaves room for the connector.

Keep in mind that this is a tube, not a tyre. It is the part you replace after a puncture, while the outer tyre stays on the wheel. Consequently, this tube belongs in tube-type 10 inch tyres rather than tubeless setups.

Key Benefits

• Inward bent valve – the pump nozzle stays reachable even inside a narrow 10 inch rim.
• 10 x 2.5 inch sizing – matches standard 10 inch electric scooter tyres.
• Inokim OX and OXO fitment – covers both 10 inch models from this manufacturer.
• Zero X10 fitment – a proven match for this popular 10 inch scooter.
• VSETT compatibility – suits VSETT versions running 10 inch wheels.
• Universal part – not tied to a single brand, so other 10 inch scooters work too.
• Travel-friendly spare – it weighs very little and packs under the seat or in a backpack.
• Fast puncture repair – swap the tube and keep the original tyre in service.

Who Is This Tube For?

This tube is made for electric scooter owners whose wheels measure 10 inches. Confirmed fitment covers the Inokim OX, the Inokim OXO, the Zero X10 and VSETT models with 10 inch wheels. Beyond that list, it also serves other electric scooters fitted with 10 inch tyres.

Above all, it answers an immediate need after a puncture. However, it is equally worth keeping on hand before anything goes wrong. Riders who commute through the city every day pick up flats most often, so a spare tube pays for itself quickly.

One point deserves attention before ordering. Your rim must genuinely require a bent valve. On Inokim OX, OXO, Zero X10 and VSETT wheels, the valve opening sits close to the hub. For that reason these scooters use an inward bent valve rather than a straight one.

Technical Specifications

Why Choose This Bent Valve Tube?

The valve shape is what separates this tube from an ordinary one. A straight valve in a 10 inch scooter rim frequently rests against the hub or the brake disc. Therefore the pump head cannot lock on properly. The bent valve removes that problem entirely.

Direction matters just as much as the bend itself. This valve angles inward, not outward, and the orientation follows the position of the rim opening shown in the photo. Because of that, it helps to check how the valve exits your old tube before you order.

The 10 x 2.5 measurement is one of the most common electric scooter sizes on the road. Tubes stretch to a degree, so this one also covers neighbouring 10 inch tyre widths. The wheel diameter, however, must always be 10 inches.

Frequently Asked Questions

Does this tube fit the Inokim OX and OXO?

• Yes, the 10 x 2.5 inch tube fits the Inokim OX.
• It also fits the Inokim OXO.
• Both Inokim scooters run 10 inch wheels.

Which models is this tube made for?

• Inokim OX and Inokim OXO.
• Zero X10.
• VSETT models with 10 inch wheels.
• Other electric scooters with 10 inch tyres.

What is the difference between a tube and a tyre?

• The tube goes inside the tyre and holds the air.
• The tyre is the outer part that meets the road surface.
• This product is the tube, not the tyre.

Why is the valve bent?

• Ten inch scooter rims have limited space around the hub.
• A bent valve lets you attach the pump nozzle.
• The valve points inward, as shown in the photo.

Is it suitable for tubeless tyres?

• No, this tube is intended for tube-type tyres.
• The tyre must be built to run with an inner tube inside.

Will it work on a scooter that is not listed?

• Yes, provided the wheel diameter is 10 inches.
• The rim must also require an inward bent valve.

How do I check the valve direction I need?

• Look at how the valve exits your current tube.
• Compare it with the photo of this bent valve.
• The opening near the hub determines the correct angle.

Is it worth buying one before a puncture?

• Yes, many riders carry a spare tube in advance.
• It is light and fits under the seat or in a backpack.

A spare tube turns a flat into a short roadside job instead of a ruined ride. With the correct 10 x 2.5 sizing and an inward bent valve, this tube goes straight into Inokim OX, Inokim OXO, Zero X10 and VSETT wheels, as well as other 10 inch electric scooters. Check your valve angle against the photo, and you will have the right replacement ready when you need it.