Inokim OX / OXO Motor 1300W 60V – Hub Motor Replacement

This Inokim OX / OXO motor is a replacement electric hub motor built for Inokim OX and Inokim OXO electric scooters. It delivers 1300 W of power and runs on a 60 V operating voltage. The motor is brushless and sits directly inside the wheel hub.

Compatibility matters here. This unit is made for Inokim scooters built on the 60 V platform. Therefore, check your scooter battery voltage before you order. A 60 V motor does not replace the 48 V versions found in older OX variants.

The part is supplied on request. For that reason, please enquire about availability and quantity before placing an order. It is a genuine replacement component, not an accessory or an upgrade kit.

Key Benefits

• 1300 W power output – matches the motor power class used in the Inokim OXO and OX Super.
• 60 V operating voltage – built around the 60 V Inokim battery and controller system.
• Hub-mounted design – the motor sits inside the wheel, so no chain or belt is needed.
• Brushless construction – there are no brushes to wear down and replace over time.
• Model-specific fitment – engineered for Inokim OX and OXO rather than universal use.
• True replacement part – swaps out a failed original scooter motor.
• Sold as a separate component – the wheel trim, brake disc and tyre can stay in place.
• Supplied on request – quantities are arranged individually with each customer.

Who Is This Motor For?

This motor fits Inokim OX and Inokim OXO electric scooters running a 60 V system. The Inokim OXO Super and Inokim OXO Hero versions use two 1300 W hub motors, one in the front wheel and one in the rear. In a single-motor configuration, the motor is fitted to the rear wheel.

Scooter workshops and experienced Inokim owners are the main users of this part. It becomes necessary when the original motor no longer turns the wheel. Damaged motor windings are another common reason for replacement. Rental fleets also keep this motor on hand as a spare.

Installation should be carried out by a qualified technician. The job involves stripping the wheel down and seating the motor into the hub. Afterwards, the wiring and connectors must be joined correctly to the controller.

Technical Specifications

Why Choose This Motor

This part is made for the Inokim OX and OXO platform specifically. As a result, its dimensions, axle and power figures match the original scooter build. Universal hub motors rarely offer that level of fitment accuracy.

Inokim builds premium-class electric scooters. The OXO model runs a 60 V 21 Ah battery paired with 1300 W class motors. Consequently, it makes sense to keep the same power and voltage figures when replacing a motor.

Because the motor is sold on its own, you can refresh the drive without touching parts that are still in good condition. The wheel trim, brake disc and tyre can all be reused. That keeps the repair focused and the cost contained.

Frequently Asked Questions

Which scooters does this motor fit?

• It fits Inokim OX and Inokim OXO electric scooters.
• Only 60 V system versions are supported.
• Scooters from other manufacturers are not covered.

What is the power output of the Inokim OX / OXO motor?

• Power output is 1300 W.
• Operating voltage is 60 V.
• These are two separate specifications, not one combined figure.

Will this motor work on a 48 V Inokim OX?

• No, this unit is built for the 60 V platform.
• Older OX versions with a 48 V system use motors of a different voltage.
• Check your scooter battery voltage before ordering.

Is this a mid-drive motor?

• No, it is a wheel hub motor.
• It is integrated directly into the wheel hub.
• Inokim OX and OXO models do not use a mid-drive layout.

How many motors does the Inokim OXO use?

• The OXO Super and Hero versions use two 1300 W hub motors.
• One sits in the front wheel and one in the rear.
• Single-motor setups place the motor in the rear wheel.

Does the motor need brush maintenance?

• No, it is a brushless design.
• There are no brushes to inspect or replace.

Can I fit this motor myself?

• Fitting should be handled by a qualified technician.
• The wheel has to be stripped and the motor seated in the hub.
• Wiring and connectors must then be linked to the controller.

Is the motor available from stock?

• The part is supplied on request.
• Please enquire about quantity before placing an order.

A failed hub motor takes an Inokim OX or OXO off the road entirely. Matching the original 1300 W and 60 V figures keeps the scooter behaving as it did when new. Confirm your system voltage, then get in touch about availability.