FabiRide Dash Pro compatibility: every bike it fits
Dash Pro compatibility comes down to the controller your bike already has. Find your bike below to see whether it fits on the factory controller or with the kit you fitted, what works on it and which leads to order. A speed limit of 25 km/h, 45 km/h or any number you choose works on all of them.
The short answer
Dash Pro fits the Sur-Ron Light Bee X and Light Bee L1e, the Talaria Sting MX3, MX4, MX5, XXX and Komodo, the E-TMX eX2, the Riding Times GT2000, GT54, GT54 PRO and GT73, Bafang BBS and M-series mid-drives and the MATE X on their factory controllers. The Sur-Ron Ultra Bee and custom builds work with a Torp, EBMX, ASI, SiliXcon, VESC or FarDriver controller, and hub kits with a King-Meter or KT display work too.
On every one of them you get the live dashboard, any speed limit you choose, the ride map with your crew, tricks and achievements, navigation, music and calls, crash alerts and ride history. What changes from bike to bike is the rider assists, because they need the display to be in charge of the throttle and the brake.
Dash Pro compatibility checker: your bike or your controller
Pick your bike, or the controller you fitted. You get a plain answer, the two options to choose in the shop and what works on your bike.
Dash Pro supported bikes at a glance
Look for your bike in the three lists below, which sum up Dash Pro compatibility. If it is in the first list, Dash Pro works with it as it comes, with nothing else to buy.
Fits as it comes
Nothing else to buy. Dash Pro works with the controller the bike was sold with.
-
Sur-Ron Light Bee X and Light Bee L1e2025 and earlier
-
Talaria Sting MX3, Sting R MX4, MX5 and XXX
-
Talaria Komodo
-
E-TMX eX2
-
Riding Times GT2000, GT54, GT54 PRO and GT73
-
Bafang BBS01, BBS02 and BBSHDMid-drive e-bikes
-
Bafang M-series drive unitsM200 to M820
-
MATE X
Fits with an upgraded controller
For bikes fitted with an aftermarket controller, and for custom builds.
-
Sur-Ron Ultra BeeWith a Torp, EBMX, ASI or VESC controller
-
Sur-Ron and Talaria with a Torp or EBMX kit
-
Custom e-motos and e-bikesWith an ASI, SiliXcon, VESC, FarDriver or Bafang controller
-
Hub-motor e-bikes with a King-Meter or KT displayIncluding stock Lishui bikes
-
Scooters with an ASI controller
Not yet
-
Sur-Ron Ultra Bee on its factory controllerNot supported yet
Your bike is not on either list? Ask us before ordering and we will tell you plainly whether it fits.
Dash Pro compatibility, bike by bike
Dash Pro compatibility for the same bikes in detail: whether each works as it comes, which controllers riders fit to it, and anything worth knowing.
E-motos: Sur-Ron, Talaria, E-TMX and Riding Times
| Bike | Works as it comes | Also works with these controllers | Good to know |
|---|---|---|---|
| Sur-Ron Light Bee X and Light Bee L1e, 2025 and earlier | Yes | Torp, EBMX, ASI, SiliXcon, VESC | ECO and SPORT move to the handlebar buttons |
| Sur-Ron Ultra Bee | Not yet | Torp, EBMX, ASI, VESC | Works with an aftermarket controller only |
| Talaria Sting MX3 | Yes | Torp, EBMX, ASI, VESC | Model recognised automatically |
| Talaria Sting R MX4 | Yes | Torp, EBMX, ASI, VESC | Model recognised automatically |
| Talaria MX5 | Yes | Torp, EBMX, ASI, VESC | HYPER mode, brake runs through the display |
| Talaria XXX | Yes | EBMX, ASI, VESC | Model recognised automatically |
| Talaria Komodo | Yes | No | Its riding modes move to the handlebar buttons |
| E-TMX eX2 | Yes | No | SiliXcon controller from the factory |
| Riding Times GT2000, GT54, GT54 PRO and GT73 | Yes | No | Pedal assist settings where the bike has pedals |
E-bikes, scooters and your own build
| Bike | Works as it comes | Also works with these controllers | Good to know |
|---|---|---|---|
| Bafang BBSHD | Yes | ASI BAC855 | Pedal assist settings, lights, walk assist |
| Bafang BBS01 and BBS02 | Yes | No | Pedal assist settings, lights, walk assist |
| Bafang M-series, M200 to M820 | Yes | No | Takes the place of the Bafang display |
| MATE X | Yes | ASI BAC855 | Grey box is the factory controller, green is the ASI |
| Inokim scooters | No | ASI | Only scooters fitted with an ASI controller |
| Your own e-moto or e-bike | Not needed | ASI, SiliXcon, VESC, FarDriver, EBMX, Bafang, King-Meter, KT | Pick your controller during setup |
What Dash Pro adds on each controller
The display only shows what your controller genuinely supports, so you never meet a setting that does nothing. Read-only controllers are shown in full and their own configuration is left alone; the limiter still works on them.
Controllers whose settings Dash Pro can change
| Controller | Fits | Settings | Rider assists | Also |
|---|---|---|---|---|
| SiliXcon LYNX | E-TMX and custom high-power builds, over 25 controller models recognised | Edit, raise above stock | Wheelie, drag, traction, cruise, throttle and regen curves, auto-hold | Lights, reverse, battery cell data, motor music |
| Talaria | Sting MX3, MX4, MX5, XXX and Komodo | Edit, raise above stock | Traction, cruise, throttle curve; wheelie, drag and regen curve on MX5 and XXX | Battery cell data, regen level on the buttons |
| ASI | BAC355, BAC555, BAC855, BAC2000, BAC4000 and BAC8000 | Edit, raise above stock, pedal assist | Wheelie, drag, traction, cruise, throttle and regen curves, auto-hold | Lights, reverse |
| Bafang BBS | BBS01, BBS02 and BBSHD | Edit, raise above stock, pedal assist | None, the throttle is wired to the motor | Lights, walk assist |
| Bafang M-series | M200 to M820 drive units | Edit, pedal assist | None, the throttle is wired to the motor | Lights, walk assist |
| Riding Times | GT2000, GT54, GT54 PRO and GT73 | Edit, raise above stock, pedal assist | Cruise and throttle response as controller settings | Power shown as an estimate |
| FarDriver | ND and CN series | Edit, raise above stock | Cruise and throttle response as controller settings | Riding mode shown, set on the bike |
| King-Meter | KM5S, J-LCD, 901U and SW-LCD, plus stock Lishui bikes | Edit, raise above stock, pedal assist | Cruise and throttle response as controller settings | Lights |
| KT / KunTeng | KT-LCD3, LCD5, LCD8, SW900 and similar hub kits | Edit, raise above stock, pedal assist | Cruise and throttle response as controller settings | Lights |
Controllers that keep their own settings
| Controller | Fits | Settings | Rider assists | Also |
|---|---|---|---|---|
| Sur-Ron | Light Bee X and Light Bee L1e, 2025 and earlier | Read only | Traction, throttle curve, cruise where the throttle runs through the display | ECO and SPORT on the buttons, battery cell data |
| VESC | VESC 6 and open-source controllers | Read only | Wheelie, drag, traction, cruise, throttle and regen curves | Riding modes on the buttons |
| Torp | TC500 and TC1000 on Light Bee X, Ultra Bee and Talaria MX3, MX4, MX5 | Read only | Traction, cruise, throttle and regen curves; wheelie and drag after a wiring check | Riding modes and reverse on the buttons |
| EBMX | X9000 on Light Bee X, Ultra Bee, Talaria and custom e-motos | Read only | Wheelie, drag, traction, cruise, throttle and regen curves when wired through the display | Street and Race on the buttons |
Dash Pro on every bike, whatever the controller
These do not depend on the controller at all, so they work on every bike in the list.
Map, tracks and crew
A live map on the display with your trail and your crew, saved tracks with leaderboards, and turn-by-turn navigation with a junction map before each turn.
- Can I make it back? Distance home next to the range left
- Roads, bike paths or sidewalks
Tricks and achievements
Jumps, wheelies and your deepest lean are measured on the bike, shown in a pop-up and kept in the app with your personal bests.
- Airtime and estimated distance
- Every trick pinned on the map
Safety, sharing and your phone
Crash detection with SOS, per-rider limits for family and friends, music and calls on the bars, group voice and every ride recorded.
- Phone as key
- Cloud backup and wireless updates
25 km/h, 45 km/h or any speed you choose, on every bike
The limiter works on every bike in the list, including stock bikes whose controller cannot be reprogrammed. Set 25 km/h for a cycle path or a new rider, 45 km/h for the road, or any other number, each with a power cap to match, and save them as riding modes.
Lifting a limit is always done in the app. Holding all three handlebar buttons for two seconds puts it back on. Open settings are for closed roads, private land and off-road use, and riding within the rules of your country is the rider's responsibility.
Ordering Dash Pro with the right leads
Every kit contains the display, the handlebar bracket, the three-button remote with its clamp and the leads for one bike or controller. When you order, pick your bike or controller and the matching leads.
If your bike or kit is not in the order list, write to us with the brand and model before ordering, and we will tell you plainly whether it is supported and which leads fit. If the controller changes later, only the leads change.
Found your bike? Order the kit with the matching leads
FabiRide Dash Pro ships with the leads for the bike or controller you choose, recognises it on first power up and stays with you through every upgrade. 24 month warranty, shipped worldwide.
Dash Pro compatibility questions
Does Dash Pro fit my e-moto?
Does Dash Pro work on a stock Sur-Ron Light Bee X?
Yes, on the factory controller of the Light Bee X and Light Bee L1e up to and including the 2025 model year. The display reads the controller as it is, switches ECO and SPORT from the handlebar buttons and holds any speed limit you set. The factory configuration is never rewritten.
Does it work on a Sur-Ron Ultra Bee?
Yes, with an aftermarket controller: a Torp, EBMX, ASI or VESC. The Ultra Bee's own factory controller is not supported yet, so on a completely stock Ultra Bee the display has nothing to talk to.
Does it work on the Talaria Komodo?
Yes, on its factory controller. The Komodo is recognised automatically, its riding modes move to the handlebar buttons and the limiter works in full. Wheelie and drag assist and the regen curve are not available on the Komodo.
Does it work with an EBMX X9000 or a Torp kit?
Yes. Dash Pro replaces the EBMX display or the optional Torp display. Riding modes are switched from the handlebar buttons and everything the controller reports is shown, while the controller's own configuration is left alone.
E-bikes, limits and ordering
Which Bafang motors are supported?
The BBS01, BBS02 and BBSHD mid-drives and the M-series drive units from the M200 to the M820. Dash Pro takes the place of the Bafang display: assist levels, pedal assist settings, lights and walk assist, plus the map, navigation and everything else on the bars.
Does it fit the MATE X?
Yes. The stock MATE X with its grey factory controller works out of the box, and so does a MATE X converted to an ASI BAC855, which also opens up the controller's advanced settings, capped at 1500 W.
Can I set a 45 km/h limit, or another speed?
Yes. 25 km/h and 45 km/h are the limits riders ask for most, and any other number works just as well, each with a power cap to match. Save a few as riding modes and switch between them with one button.
My bike is not listed. What now?
Write to us with the brand, the model and, if you know it, the controller, and we will check Dash Pro compatibility for you. The list grows with every update, and we will tell you plainly whether your bike is supported yet before you order.
