Talaria display upgrade: MX3, MX4, MX5 and XXX
The stock Talaria screen tells you the speed. A smart display that reads the Talaria controller can hold a limit, switch ECO, SPORT and HYPER from the bars, tune throttle and regen, and record every ride. Here is what fits which Sting, stock controller included.
The short answer
FabiRide Dash Pro works on the stock Talaria Sting controller across MX3, MX4, MX5 and XXX. It tells the models apart on its own, gives each its correct riding modes and its true power ceiling, and adds what the factory screen never had: any speed limit you choose, limits per rider, throttle and regen curves, traction control, ride recording and your phone on the screen.
If you later move to a Torp or an ASI controller, the same display carries on. Both are among the 11 controller families it recognises, so only the leads change.
What the factory screen leaves out
The stock Talaria display shows speed, battery and mode. It cannot hold the bike to a limit, cannot tell a young rider apart from you, and forgets the ride the moment you switch off.
Dash Pro keeps the numbers and adds the decisions. Set 25 km/h for the road and lift it at the trail. Give a new rider their own ceiling. Soften the throttle for slow technical riding, sharpen it for the track. Every ride is recorded with its route, so you can replay it later.
Three ways to upgrade a Talaria display
Factory replacement screen
The screen the Sting shipped with, or a plug compatible copy. Fixes a broken display and changes nothing about the ride.
- Cheapest fix for a broken screen
- No limit, no app, no rider profiles
- Same speed and battery readout as before
Controller brand display
Displays made for one aftermarket controller line. They need that controller fitted first and show only its data.
- Shows that controller’s data
- No use on the stock Talaria controller
- Tied to one brand
FabiRide Dash ProStock and aftermarket
Reads the stock Talaria controller, tells MX3, MX4, MX5 and XXX apart, and adds limits, tuning, riders, ride history and your phone.
- Works on the stock Talaria controller
- ECO, SPORT and HYPER from the bars
- Stays with the bike after a Torp or ASI upgrade
Side by side
| Feature | Factory replacement | Controller brand display | FabiRide Dash Pro |
|---|---|---|---|
| Works on a stock Talaria Sting | Yes | No | Yes |
| Knows MX3, MX4, MX5 and XXX apart | No | No | Yes, automatically |
| ECO, SPORT and HYPER from the bars | Stock switch only | Depends | Yes |
| Speed limit you set and lift yourself | No | Depends on the controller | Yes, from the bars or the app |
| Throttle response and regen strength | No | Depends | Yes, adjustable |
| Traction control | No | Depends | Yes |
| Separate limits per rider | No | No | Yes, enforced on the bike |
| Ride recording with the route | No | Some, in an app | Yes, automatically |
| Music, calls and notifications on the screen | No | No | Yes |
| Still works after a Torp or ASI upgrade | No | Only that brand | Yes |
Tuned for the Sting you own
On the Talaria controller Dash Pro can do more than cap the bike. Throttle response, regen strength, cruise control and traction control are all adjustable, and the display knows the real ceiling of your model, so a setting can never ask for more than your motor can give.
Save a road setup and an off road setup as riding modes and move between them with one button. No menus, no re entering numbers, no stopping.
Fitting it
The kit ships with the display, a handlebar bracket, a three button remote with its clamp and the leads for your controller. Choose Talaria when ordering a stock bike, or the controller brand if the bike was upgraded. The display recognises the model the first time it powers up.
Every Sting, one display
FabiRide Dash Pro fits MX3, MX4, MX5 and XXX on the stock controller and stays with the bike through a Torp or ASI upgrade. 24 month warranty, shipped worldwide.
Questions riders ask
Does it work on a stock Talaria Sting MX4?
Yes. FabiRide Dash Pro reads the stock Talaria controller on MX3, MX4, MX5 and XXX. Nothing is reprogrammed or replaced, and the display recognises the model on its own.
Does it know the difference between MX3, MX4 and MX5?
Yes. The models are told apart automatically. Each gets its correct riding modes and its true power ceiling, so a slider can never ask for more than your motor can give.
Can it switch HYPER mode on the MX5?
Yes. ECO and SPORT on every Sting, plus HYPER on the MX5, are switched from the handlebar buttons or the app.
Can it limit my Talaria to 25 km/h?
Yes, and to any other number. The limit is held smoothly, lifted in one press on the bars, and can be locked for a rider who is not allowed to change it.
Does it work with a Torp TC500 or TC1000?
Yes. Torp kits on Talaria MX3 and MX4 are recognised. On Torp the display shows everything and leaves the controller’s own configuration untouched, and the limiter works in full.
Can I adjust throttle and regen?
Yes, on the Talaria controller both are adjustable from the app, together with cruise control and traction control. Regen tuning applies on the MX5.
What comes in the box?
The display, a handlebar bracket, a three button remote with its clamp, and the leads for the controller you chose when ordering.
