This 420 chain master link is a #420 pitch connecting link built for Sur-Ron Light Bee, Talaria Sting and Talaria 3X electric motorcycles. It also fits other e-moto and moto systems running a #420 standard chain. The link closes the chain loop or lets you open it in seconds.
The set consists of side plates, pins and a retaining element (depending on version). Together these parts form a secure joint that carries drive load from the front sprocket to the rear wheel. Installation normally requires no chain riveting tool. Therefore chain swaps, washing and sprocket service turn into a few minutes of work.
Compatibility here is defined by chain pitch, not by vehicle brand. Because of that, the same #420 connecting link suits many e-motorcycles, pit bike style machines and other #420 chain systems. Riders who service their own rear drive keep one in the toolbox as a spare.
Key Benefits
- Fast installation – the chain joins and separates without a chain press.
- Secure retention – the locking element holds the joint on trails and on the road.
- Universal #420 standard – compatible with a wide range of #420 pitch chains.
- Complete set – side plates, pins and retaining element in one package.
- Compact size – fits in a tool box or backpack as a spare part.
- Service freedom – remove the chain for cleaning without a chain breaker.
- Trail and road ready – suited to enduro riding and to daily commuting alike.
- Version choice – produced for standard chains and for O-ring type chains.
Who Is This For?
This connecting link is made for the Sur-Ron Light Bee, the Talaria Sting and the Talaria 3X. It also serves other electric and combustion moto systems that use a #420 standard chain. Riders of pit bike style machines with the same pitch can use it as well.
The part is useful for owners who service the rear drive themselves. For example, when changing sprockets, washing the chain or adjusting chain tension. Moreover, it makes a practical spare for longer off-road trips, where a broken chain can end the ride.
Workshops also benefit from it. Shops that service e-motorcycles without riveting equipment can still open and close a #420 chain properly. As a result, repairs move faster and need a minimal set of tools.
Package Contents
- Side plates
- Pins
- Retaining element (depending on version)
Technical Specifications
| Standard | #420 |
| Type | Chain connecting link (master link) |
| Composition | Side plates, pins and retaining element (depending on version) |
| Colour / finish | According to batch |
| Chain type | All #420 pitch chains (O-ring / non O-ring, depending on version) |
| Vehicles | Sur-Ron Light Bee, Talaria Sting, Talaria 3X and other #420 chain systems |
| Tools required | Riveting tool normally not needed |
| Category | Chassis and transmission parts |
Why Choose This 420 Connecting Link?
The first advantage is time. The chain opens and closes without a chain press. Because of that, service can be carried out in the field, far from a workbench or a power supply.
The second advantage is breadth of fitment. The #420 pitch defines compatibility, not a specific model name. However, an O-ring chain needs the matching O-ring version. Therefore check the version before you buy.
The third advantage is fitting accuracy. The open end of the clip points against the direction of chain travel. As a result, the retainer does not get knocked off during riding. This small detail separates a joint that holds from one that fails.
Frequently Asked Questions
Does this 420 master link fit the Sur-Ron Light Bee?
- Yes, it is intended for the Sur-Ron Light Bee with a #420 pitch chain.
- Chain pitch determines fitment, not the model name.
Which models is this connecting link made for?
- Sur-Ron Light Bee, Talaria Sting and Talaria 3X.
- Other electric and moto systems running a #420 standard chain.
Does it work with an O-ring 420 chain?
- Yes, if the link is specified for the O-ring type.
- Check the version before ordering.
Do I need a special tool to fit it?
- Normally no riveting tool is required.
- The link is designed to be fitted without a chain press.
What comes in the package?
- Side plates and pins.
- A retaining element, depending on version.
Which way should the clip face?
- The open end points against the direction of chain travel.
- This keeps the retainer from being knocked loose while riding.
Can I use it on a Talaria Sting or Talaria 3X?
- Yes, both models run a #420 chain.
- The same link also suits other #420 systems.
What colour is the link?
- Colour and finish vary according to batch.
- Function and #420 dimensions stay the same.
A #420 connecting link is a small part with a large job. It holds the chain loop together on the Sur-Ron Light Bee, Talaria Sting and Talaria 3X. Keep a spare in your pack, choose the right version for your chain type, and rear drive service stays a quick job.
There are no reviews yet.