This FarDriver Bluetooth programming dongle is compatible with Tuttio Soleil 01 scooters fitted with a FarDriver controller and the white connector in the controller wiring loom. It plugs directly into that white port, so you can change controller parameters from a phone or tablet using the Fardriver app (Nanjing FarDriver).
The adapter is built for programming and diagnostics (programming and diagnostic adapter) through the controller connector. It is not a USB computer adapter. Instead, it creates a Bluetooth link that lets the app write settings to the FarDriver motor controller while the vehicle is powered on and the controller is active.
Caution: check the pinout in the white connector before connecting. Wrong pinout can damage the dongle and/or the controller. Insert the connector straight and do not force it if the pins do not align.
Key benefits for FarDriver controller setup
- Wireless parameter editing (wireless configuration) – changes are made in the Fardriver (Nanjing FarDriver) app from a Bluetooth phone or tablet.
- Direct white-connector plug-in – the dongle connects to the white connector in the controller wiring harness, so no extra wiring is required.
- Throttle response tuning (throttle response) – adjust accelerator sensitivity and the feel of acceleration in the app.
- Regenerative braking settings (regen braking) – select how strongly braking returns energy to the battery through recuperation.
- Speed modes and limits (speed modes & limits) – set ECO logic, acceleration behavior, and maximum speed limits inside the controller.
- Battery and motor limit entry – enter correct voltage, current, and protection values for battery and motor limits.
- Auto Learn / Motor Learn support – start Auto Learn (Motor Learn) in the app when motor calibration is required.
- Connection stability depends on fit – a fully seated connector helps avoid pairing interruptions caused by a loose plug.
Who is this for?
This FarDriver Bluetooth programming dongle is intended for Tuttio Soleil 01 owners whose vehicle uses a FarDriver motor controller with the white connector on the controller wiring loom. It is used when you want to connect to the controller wirelessly through the Fardriver / Nanjing FarDriver app.
The adapter suits riders and technicians who prefer adjusting controller behavior without wired programming. It is used to tune throttle response, set recuperation strength, and adjust speed limiter behavior from a phone or tablet with Bluetooth.
This dongle is compatible only with FarDriver controllers. It is also used when you need to run the Auto Learn (Motor Learn) procedure after making changes that require motor calibration.
Package contents
- FarDriver Bluetooth programming and diagnostic adapter (Bluetooth programming dongle)
Technical specifications
| Product | FarDriver Bluetooth connection adapter (dongle) |
| Purpose | Programming and diagnostics for a FarDriver motor controller via mobile app |
| Control app | Fardriver app; Android search term: “Nanjing FarDriver” |
| Device required | Phone or tablet with Bluetooth |
| Connection type | Plugs into the white connector on the controller wiring harness |
| Compatible controllers | FarDriver motor controllers only |
| Power | Powered when the vehicle is switched on and the controller is active |
| Indication | Some versions may include a blinking LED indicator |
| Configurable parameters | Throttle response, regenerative braking, speed modes and limits, battery and motor voltage/current limits |
| Calibration function | Auto Learn (Motor Learn) via the app |
Why choose this dongle for Tuttio Soleil 01 tuning?
This adapter is designed specifically to interface with the FarDriver controller through the controller’s own connector, so settings can be written in the Fardriver / Nanjing FarDriver app. That app workflow is the reason it is described as a programming and diagnostics adapter rather than a generic Bluetooth accessory.
The direct white-connector connection keeps installation simple on a Tuttio Soleil 01 with the correct harness plug. It also means pairing stability depends on the connector seating, because a loose connection can interrupt communication.
Safety during installation is critical with controller electronics. Check the pinout before connecting, because a wrong pinout can damage the dongle and/or the controller. Push the connector in straight, and stop if the pins do not line up.
FAQ
Is this FarDriver Bluetooth programming dongle compatible with Tuttio Soleil 01?
- Yes, it fits Tuttio Soleil 01 models that have a FarDriver controller and the white connector in the controller wiring loom.
- It connects to that white plug to enable app-based configuration on a phone or tablet.
Does it work with controllers other than FarDriver?
- No, it is compatible only with FarDriver motor controllers.
- It is intended for FarDriver controller communication through the controller connector using the Fardriver / Nanjing FarDriver app.
Is this a USB adapter for a PC?
- No, this is not a USB computer adapter.
- It is a Bluetooth programming dongle that connects through the controller’s white connector and works with the mobile app.
What settings can I change with the Fardriver app?
- Throttle response (throttle response) sensitivity and acceleration feel.
- Regenerative braking (regen braking) strength that returns energy to the battery.
- Speed modes and limits (speed modes & limits), including ECO logic and maximum speed limits.
- Battery and motor voltage/current limits and protection values.
How is the dongle powered?
- The dongle is powered when the vehicle is switched on and the controller is active.
- Some versions may show a blinking LED indicator during operation.
How do I connect it without damaging anything?
- Check the pinout in the white connector before connecting.
- Wrong pinout can damage the dongle and/or the controller.
- Insert the connector straight, and do not force it if the pins do not match.
Why does pairing sometimes drop?
- Pairing stability depends on the physical connection to the white connector.
- A loose plug can cause pairing interruptions, so ensure the connector locks in firmly.
When should I use Auto Learn (Motor Learn)?
- Use Auto Learn (Motor Learn) in the app when motor calibration is required.
- This is commonly done after controller parameter changes that require recalibration.
This FarDriver Bluetooth programming dongle provides app-based controller setup for a Tuttio Soleil 01 with the correct FarDriver controller and white harness connector. Always verify pinout before connection to protect the dongle and the controller.
Search terms: FarDriver Bluetooth programming dongle (Bluetooth programming dongle), FarDriver controller adapter (controller adapter), Fardriver app (Nanjing FarDriver), controller diagnostics (diagnostic adapter), throttle response tuning, regen braking setup, speed limiter settings, Auto Learn / Motor Learn.
