Supernova Power Connector Cable 1300 mm – Front Light Power Lead

The Supernova Power Connector cable is a 1300 mm (1.3 m) front light power lead built for every SUPERNOVA front light fitted with a POWER CONNECTOR socket. One end carries the POWER CONNECTOR plug. The opposite end finishes in open, stripped wire ends. Together they link your e-bike headlight to the light output on a motor or controller.

On the light side, the connection works on a plug-and-play principle. The POWER CONNECTOR plug seats into the light socket in a few seconds. No soldering iron is needed, and no tools either. As a result, the headlight can be removed later without cutting a single wire.

On the motor or controller side, the cable ends in bare conductors. This open end is what makes the lead so adaptable. It connects to a wide range of e-bike motors and controllers. Simply follow your own system diagram and observe correct polarity during installation.

Key Benefits

• POWER CONNECTOR plug – the light side connects in seconds, with no soldering and no tools required.
• 1300 mm length – enough cable to route neatly along or through the frame.
• Open wire ends – the motor side adapts to different controller and motor light outputs.
• Full SUPERNOVA compatibility – fits every SUPERNOVA front light with a POWER CONNECTOR socket.
• Removable headlight – the plug connection lets you detach the light without cutting the wiring loom.
• Clean installation – one continuous cable replaces soldered joints and insulating sleeves.
• Flexible power source – wire it to a motor, a controller, or a battery light output.
• Original manufacturer fitment – POWER CONNECTOR is SUPERNOVA’s own plug and socket system, so no adapters sit in between.

Who Is This Cable For?

This lead is made for owners of e-bikes and pedelecs who are installing or replacing a SUPERNOVA front light. It suits every SUPERNOVA front light that has a POWER CONNECTOR socket on the housing. Riders building a new lighting circuit will find it equally useful.

Workshops and mechanics benefit as well. When an old headlight is swapped for a new one, the whole installation does not need rebuilding. Instead, the open wire ends are joined to the light output on the controller or motor. That keeps bench time short and the loom tidy.

One limitation is worth noting. The cable does not suit lights without a POWER CONNECTOR socket. In that case, a matching adapter is required instead. The plug is also not compatible with headlight connectors from other manufacturers.

Technical Specifications

Why Choose This Cable?

The main difference is the original SUPERNOVA connector. POWER CONNECTOR is the manufacturer’s own plug and socket system. Because of that, the connection seats precisely. No adapters and no intermediate soldered joints are involved.

In addition, this lead combines two different wiring approaches in a single cable. The light end is a plug fitting, while the motor end stays free for custom wiring. That combination is why the same cable works across many different e-bike systems.

The 1.3 m length was chosen with real installations in mind. It reaches from the motor area up to a light mounted on the fork or handlebar. Consequently, most builds need no extension or splicing.

Frequently Asked Questions

Will this cable fit a light without a Power Connector socket?

• No, the cable requires a headlight with a POWER CONNECTOR socket.
• A matching adapter is needed for other socket types.
• The plug is not compatible with headlight connectors from other brands.

Which SUPERNOVA lights does this cable work with?

• It fits all SUPERNOVA front lights equipped with a POWER CONNECTOR socket.
• The plug seats directly into the light housing socket.
• No adapter is needed between the cable and the light.

How do I connect it to a motor or controller?

• The motor-side end consists of open, stripped wire ends.
• Connect them according to your system polarity and the manufacturer instructions.
• Wire them to the light output on the motor, controller, or battery.

How long is this cable?

• The total length is 1300 mm, which equals 1.3 m.
• That length allows tidy routing along the frame.

Is 1.3 m enough for internal frame routing?

• In most cases yes, though it depends on frame size and route.
• Measure the full path from the power source to the light before installing.

Do I need to solder anything?

• No soldering is required on the light side, since it uses the plug.
• The motor side is joined according to your own system wiring.

Can I remove the headlight later?

• Yes, the plug connection unplugs without cutting the installation.
• This makes seasonal removal or light swaps straightforward.

With one original plug on the light side and free conductors on the other, this 1300 mm SUPERNOVA lead keeps e-bike headlight wiring simple and serviceable. Measure your route, match your polarity, and the installation is done.