Talaria Rear Brake Disc 220 mm – OEM for MX3, MX4, MX5, X3

The Talaria rear brake disc is a 220 mm OEM brake rotor built for Talaria electric dirt bikes. It fits the Talaria MX3, MX4, MX5 and X3. The disc mounts directly onto the rear wheel hub and works with the original Talaria brake caliper. For 2023 model year bikes, an adapter is required for fitting.

This is a factory replacement part rather than a performance upgrade. Therefore it restores stock braking power and thermal stability instead of increasing them. Mounting points, caliper clearance and overall geometry match Talaria factory dimensions exactly. As a result, installation needs no modification at all.

The rotor is a straight bolt-on component. You will not need to drill the hub, reposition the caliper or add spacers. Because the fitment is model-specific, guesswork is removed from the job. Note that this disc is designed for the rear wheel only.

Key Benefits

• 220 mm diameter – the factory rear rotor size for Talaria, so the caliper stays in its original position.
• OEM compatibility – exact mounting points, correct clearance and factory geometry throughout.
• No-modification fitting – the disc bolts straight onto the standard Talaria rear hub.
• Consistent braking – dependable stopping power both in town and out on the trail.
• Thermal stability – factory specifications help prevent brake fade once the rotor heats up.
• Reduced vibration – manufacturing to stock standards keeps braking smooth and free of pulsing.
• Works with the OEM caliper – pairs with the original Talaria brake caliper on the listed models.
• Model-specific fitment – made for MX3, MX4, MX5 and X3, with an adapter for 2023 bikes.

Who Is This Rotor For?

This brake disc suits riders of the Talaria MX3, Talaria MX4, Talaria MX5 and Talaria X3 electric motorcycles. All of these models use a 220 mm rotor at the rear wheel. Owners of 2023 model year bikes will need an adapter during installation.

It is the right choice when your rear disc has worn thin, warped after a crash or lost its flat braking surface. Many riders also fit one when refreshing the whole rear brake assembly after a hard off-road season. In that case, pairing the new rotor with fresh brake pads gives the best results.

Before installation, check the disc thickness and the bolt pattern against your model’s service manual. Keep in mind that this rotor does not fit the front wheel. Talaria bikes run a larger diameter disc up front, so the two are not interchangeable.

What’s in the Box

• 1 x Talaria rear brake disc, 220 mm
• Mounting bolts – not included unless otherwise stated

Technical Specifications

Why Choose This Talaria Rear Disc?

This is an original Talaria component, so its dimensions match the rotor fitted at the factory. Consequently, you avoid the hassle of sourcing a universal disc and shimming the caliper into alignment. The bolt holes line up on the first attempt.

Unlike aftermarket performance rotors, this part does not alter your braking characteristics. Instead, it returns the bike to the stopping behaviour it had when new. The factory surface finish and geometry also help minimise vibration and rotor runout during hard braking.

Just as important, the fitment is model-specific rather than approximate. On MX3, MX4, MX5 and X3 bikes the disc bolts straight on. For 2023 machines, an adapter handles the mounting instead.

Frequently Asked Questions

Will this Talaria rear brake disc fit the front wheel?

• No, this 220 mm rotor is made for the rear wheel only.
• Talaria bikes use a larger diameter disc at the front.
• Front and rear rotors are not interchangeable.

Which Talaria models does this brake disc fit?

• It fits the Talaria MX3, MX4, MX5 and X3.
• An adapter is required on 2023 model year bikes.
• The disc is made for Talaria electric dirt bikes, not bicycles.

Do I need new mounting bolts?

• OEM or new high-grade mounting bolts are recommended.
• Bolts are not included unless the listing states otherwise.

Is this a performance upgrade rotor?

• No, it is a factory replacement part.
• It restores stock braking power and heat resistance.
• It does not increase them beyond standard.

Does fitting require modification to the bike?

• No drilling of the hub is needed.
• The caliper stays in its original position.
• No spacers or shims are required.

What should I check before installing?

• Confirm the disc thickness against your model’s manual.
• Check the mounting bolt pattern for your specific bike.
• Inspect the brake pads and replace them if worn.

Will it work with my standard brake caliper?

• Yes, it is designed for the original Talaria caliper.
• Clearance matches factory specification on the listed models.

A worn or warped rear rotor affects how confidently you can slow the bike on loose ground. Fitting an original 220 mm Talaria disc brings the rear brake back to factory condition. Check your model year first, order the adapter if you ride a 2023 machine, and fit new pads at the same time for even bedding-in.