Torp Full-Color Display HMI for Sur-Ron & Talaria (TC500/TC1000)

Compatible with Torp TC500 and Torp TC1000 motor controllers fitted to Sur-Ron Light Bee, Sur-Ron Ultra Bee, and Talaria MX3/MX4/MX5, the Torp Full-Color Display is a handlebar-mounted controller display (HMI – human–machine interface).

This 2-inch IPS colour screen adds a clear riding dashboard for controller data (controller data), speed (speed), and battery data (battery data) in one place. It connects directly to the Torp controller wiring harness (wiring harness) for a clean install.

The unit uses a Bluetooth / CAN data port (Bluetooth/CAN) and carries an IP65 water-resistance rating. It also includes a dedicated control button (control button) so key functions stay on the handlebar.

Key benefits of the Torp Full-Color Display

• 2″ IPS colour screen (IPS display) – the IPS panel delivers a 170° viewing angle for readable data from the side.
• High brightness display – the bright panel keeps speed and controller values legible in strong ambient light.
• Controller data + speed on-screen – the display shows live controller data (controller data) together with speed (speed).
• Battery data while riding – the screen presents battery information (battery data) without extra instruments.
• Mode switching from the bars – the supplied control button lets you switch between modes in the Torp controller system.
• Reverse activation on supported bikes – reverse can be enabled on Sur-Ron Light Bee and Talaria MX3/MX4 in supported configurations.
• Daily mode control – Daily mode can be activated on Sur-Ron Light Bee and Talaria MX3/MX4/MX5 setups that support it.
• IP65 weather protection – the IP65 rating is intended for outdoor riding conditions.

Who is this display for?

The Torp Full-Color Display is designed as the dedicated controller screen (HMI display) for electric enduro and motocross bikes running the Torp TC ecosystem. It supports TC1000 gen 1.X, TC500 gen 1.X, TC1000 gen 2.X, and TC500 gen 2.X controller generations.

It is aimed at riders using Sur-Ron Light Bee and Sur-Ron Ultra Bee platforms with a Torp TC500 or TC1000 installed. It is also built for Talaria MX3, Talaria MX4, and Talaria MX5 builds that use the Torp controller harness connection.

This display suits riders who want speed, controller status, and battery information visible on the handlebar during a ride. It also suits riders who want mode changes and supported functions handled from one HMI point.

Important for Sur-Ron users: Sur-Ron Light Bee and Sur-Ron Ultra Bee owners with a controller wiring harness that uses a 3-connector plug set must purchase a 5-connector Replacement Wiring Loom for the correct model. This requirement does not apply to Talaria MX3/MX4/MX5 users.

Package contents

• 1× Torp Display with control button (control button)
• 1× Hex key (hex key)
• User Manual (User Manual)

Technical specifications

Why choose this Torp HMI display?

This Torp Full-Color Display is built specifically for the Torp TC500 and TC1000 controller family, so the screen is focused on the values Torp riders actually monitor. The direct connection to the Torp wiring harness keeps the installation method consistent with the TC ecosystem.

The 2-inch IPS screen combines a wide 170° viewing angle with a high brightness display, which helps when the bike is leaned over or viewed from off-axis. The compact 85 × 65 × 60 mm housing fits typical bar setups while still presenting speed, controller data, and battery data clearly.

The included control button puts mode switching at your thumb, and the screen supports reverse and Daily mode where the bike configuration allows it. IP65 protection and a -20 °C to 60 °C operating range match the mixed conditions seen in electric enduro use.

FAQ

Which bikes is the Torp Full-Color Display compatible with?

• Designed for Sur-Ron Light Bee with a Torp TC500 or TC1000 installed.
• Designed for Sur-Ron Ultra Bee with a Torp TC500 or TC1000 installed.
• Designed for Talaria MX3, Talaria MX4, and Talaria MX5 using the Torp TC ecosystem.

Which Torp controllers and generations does it support?

• Supports TC1000 gen 1.X and TC1000 gen 2.X.
• Supports TC500 gen 1.X and TC500 gen 2.X.

What information does the screen show while riding?

• Shows controller data (controller data) for quick status checks.
• Shows speed (speed) on the handlebar display.
• Shows battery data (battery data) during operation.

Can I switch riding modes from the handlebar?

• Yes, the included control button (control button) switches between modes in the Torp controller system.

Does it support reverse on Sur-Ron and Talaria?

• Reverse can be enabled on Sur-Ron Light Bee in supported configurations.
• Reverse can be enabled on Talaria MX3 and Talaria MX4 in supported configurations.

What is Daily mode, and which models support it?

• The display can activate the Daily mode (Daily mode) button when the setup supports it.
• Daily mode control is listed for Sur-Ron Light Bee and Talaria MX3/MX4/MX5.

Do Sur-Ron Light Bee or Ultra Bee owners need a different wiring loom?

• If your Sur-Ron Light Bee or Sur-Ron Ultra Bee controller harness uses a 3-connector plug set, you must buy a 5-connector Replacement Wiring Loom for your model.
• This 3-connector note does not apply to Talaria MX3, MX4, or MX5 users.

Is the Torp Full-Color Display waterproof for trail riding?

• The unit is rated IP65 for water resistance in outdoor conditions.
• Operating temperature is specified at -20 °C to 60 °C.

Torp Full-Color Display is a compact, bar-mounted HMI (human–machine interface) for Torp TC500/TC1000 builds on Sur-Ron and Talaria platforms. It combines a 2″ IPS screen, Bluetooth/CAN connectivity, and a control button for mode changes and supported functions.

Search terms: Torp Full-Color Display (full colour display), Torp controller display (HMI display), Torp TC500/TC1000 display, Sur-Ron display upgrade, Talaria display upgrade, Bluetooth CAN motorcycle display.