Throttle lever – Accelerator lever (half), left, with HIGO 3-pin connector

Compact half-turn throttle grip for left-hand drive. Perfect for electric bikes, scooters, scooters and other e-mobility systems with HIGO 3-pin accelerator connector. Sideways gives more precise control and less wrist fatigue during long rides.

Key benefits

• Half-turn – precise dosing, faster response.
• Left-hand installation – easy combination with right-hand brake/other controls.
• HIGO 3-pin (waterproof) connector – quick plug & play connection.
• Wide compatibility with most 3 wire (VCC/GND/Signal) controllers.

Compatibility

• Transport: e-bike, e-scooter, e-scooter, etc.
• Controls: control units with analogue accelerator input (3 wires) and HIGO 3-pin socket.

Specifications

• Type: half gas handle (rotary)
• Half: Left
• Connector: HIGO 3-pin (m/f by batch; colours by factory standard)
• Wires: +5V (or controller VCC), GND, Signal
• Protection: IP-type seals on the connector (splash proof)

Installation

• Install on the left side of the steering wheel and pull the cable so that it doesn’t rub or twist during a full turn of the wheel.
• Connect the HIGO 3-pin connector in the “lock” direction – do not turn the connector.
• Check the polarity and direction of the signal according to the schematic of your controller.
• After connection, calibrate the accelerator (if required by the controller).

FAQ

Does it fit with my 36/48/60/72 V system?
Yes – the accelerator signal is analogue and the power is provided by the controller. Make sure the controller has 5 V VCC for the accelerator.

How is a half grip better than a full grip?
Shorter turning stroke = quicker reaction, less wrist fatigue, especially in the city or on the track.

Can it be installed on the right side?
This model is for the left side. If you need it on the right, please contact us and we will offer an alternative.

half throttle, accelerator grip left, HIGO 3 pin throttle, ebike throttle 3-wire, electric bike throttle, e-scooter throttle, FabiRide