The compact Higo 3 pin speed sensor extension cable is a handy solution when you need to route the speed sensor connector elsewhere or neatly route the wiring harness under the frame. The IP65 rating protects against dust and rain and the current rating of up to 2 A is suitable for most e-bike and e-scooter speed sensors.
Customization
- Speed sensor extension for e-bikes, e-scooters, e-motos
- Optimisation of cable routing and orderly installation
- Compatible with Higo 3 pin sensor fiche (male/female according to your kit)
Key features
- Higo 3 pin connector – Plug & Play with many controllers/screens
- IP65 – dust and water splash proof
- Max. Current up to 2 A – sufficient for speed sensors and low current signals
- Flexible insulation – convenient for laying under the frame, in the fork or wing area
Specifications
- Type: higo 3 pin extension (speed sensor)
- Max. Current: 2 A
- Resistance: IP65 (dust and splash)
- Purpose of the wire: signalling (speed sensor)
- Colour: black
Installation
- Switch off the power and disconnect the battery.
- Insert the Higo plug until it clicks (do not twist the connector).
- Check that the cable is not stretched in bends or fork strokes.
- Switch on the system and check the speed readings.
FAQ
Is it suitable for any Higo 3 pin speed sensor?
Yes, if using a standard Higo 3 pin pinout (the most common on the e-bike market).
Can the cable be laid externally under the frame?
Yes, IP65 is sufficient for dust and splash. Avoid high pressure washing directly into the connectors.
Higo 3 pin connector, speed sensor extension, speed sensor extension, e-bike cable, Higo cable, IP65 connector, FabiRide