siliXcon AM 0810 Motor Controller (ESC) 16S, up to 68V, 4.6 kW

The siliXcon AM 0810 is a programmable motor controller (ESC) built for BLDC and PMSM motors. It runs on a 16S lithium battery pack with a nominal battery voltage of 58 V DC. The operating range spans 12 V DC to 68 V DC. This is the 0810 version, made specifically for 16S systems.

Rated output reaches 2,400 W in continuous 60-minute duty. Peak output climbs to 4,600 W for 10-second bursts. The controller belongs to the ESC3 generation and is the lightest standard member of the AM family. Because of that, it fits builds where weight, compact size and efficiency matter most.

siliXcon is a Czech electronics manufacturer specialising in programmable electronic speed controllers. The AM 0810 drives all common types of electric motor. It also supports smooth start and regenerative braking, so riders and operators get controlled acceleration plus energy recovery.

Key Benefits

• 16S lithium support up to 68 V – a wide working range from 12 V DC to 68 V DC covers most high-voltage packs.
• 2,400 W rated power – sustained 60-minute duty with a BLDC motor, not just a short burst figure.
• 4,600 W peak power – a 10-second headroom reserve for hard acceleration and load spikes.
• Regenerative braking – energy returns to the battery, which lifts overall system efficiency.
• Smooth start – even, progressive launch that improves control feel and protects the drivetrain.
• Universal motor support – handles all common electric motor types, including BLDC and PMSM.
• Lightest ESC3 controller – high power density packed into minimal dimensions.
• Low power losses – between 5 W and 20 W depending on the operating mode.

Who Is This Controller For?

The siliXcon AM 0810 suits automotive and industrial motor control tasks. Engineers also use it in electric hand tools and powered equipment. In addition, it works as a controller for starter-generators on internal combustion engines.

In the light electric vehicle field, the AM 0810 powers premium sport electric motorcycles, electric bicycles and electric surfboards. Its compact footprint means it fits builds where mounting space is extremely tight. Marine drive systems are another common home for this unit.

Further applications include professional drones and RC models, servo control, scientific research and new drivetrain development. For that reason, engineers building custom powertrains regularly specify this controller. Anyone comparing the 0420, 0610 and 0810 versions should pick 0810 when the pack is 16S.

Technical Specifications

ESC3 Family Version Comparison

Why Choose the siliXcon AM 0810?

The 0810 carries the largest power reserve in the whole AM series. Its 2,400 W rated figure sits 700 W above the 8S 0420 version. Peak output is likewise the highest in the range, at 4,600 W against 3,400 W on the lower-voltage variant.

Efficiency is the second differentiator. Losses drop to just 5 W in the most economical operating mode and stay at 20 W even at the highest rated current. Less waste heat means less thermal management hardware around the controller.

Finally, the AM is the lightest standard controller in the ESC3 generation. Therefore builders get 16S-class voltage and 4.6 kW peak capability without a bulky housing. That combination is what makes this version the practical choice for sport e-motorcycles and eFoil-style boards.

Frequently Asked Questions

What battery does the siliXcon AM 0810 work with?

• It is designed for a 16S lithium battery pack.
• Nominal battery voltage is 58 V DC.
• The full working window runs from 12 V DC to 68 V DC.

Which motors is this controller compatible with?

• All common types of electric motor.
• BLDC motors are directly supported.
• PMSM motors are directly supported.

How much power does the AM 0810 deliver?

• Up to 2,400 W rated over a 60-minute run with a BLDC motor.
• Up to 4,600 W peak for 10 seconds.
• Rated current is 42 A / 35 A / 22 A; peak current is 80 A / 75 A.

Does it support regenerative braking?

• Yes, regenerative braking is built in.
• Energy is returned to the battery pack.
• Overall system efficiency improves as a result.

What is the difference between the 0420, 0610 and 0810 versions?

• 0420 is an 8S controller rated at 1,700 W with 34 V DC maximum.
• 0610 is a 12S controller rated at 2,200 W with 51 V DC maximum.
• 0810 is the 16S controller rated at 2,400 W with 68 V DC maximum.

Which vehicles and machines is it used in?

• Sport electric motorcycles, electric bicycles and electric surfboards.
• Industrial, automotive and marine drive systems.
• Electric hand tools, powered equipment and combustion engine starter-generators.

How much power does the controller itself lose?

• Losses range from 5 W to 20 W.
• The exact figure depends on the operating mode and current level.
• The 5 W figure applies in the most economical mode.

Which version am I buying here?

• This listing covers the 0810 version only.
• It is configured for 16S systems at 58 V DC nominal.
• It belongs to the ESC3 controller generation.

With 16S support, 4.6 kW of peak output and regenerative braking in the lightest ESC3 housing, the siliXcon AM 0810 gives custom drivetrain builders serious capability per gram. Smooth start keeps the launch controlled, while low 5-20 W losses keep the package cool and efficient.