Accelerator (throttle) lever with 36 V indicator and button – thumb-operated

Compact and comfortable accelerator/throttle grip for electric bikes, scooters, scooters and other 3-phase BLDC drives with a conventional 3-wire accelerator connection. Thumb operated, with voltage indicator (36 V class) and function button (e.g. for lights, boost, eco, etc. – according to your controller connection).

Key benefits

• Ergonomic controls – thumb-operated lever for precise and smooth acceleration.
• Real 36 V indication – you will see the battery voltage in the 36 V system on the display.
• Additional button – can be assigned to the desired function (by controller).
• Wide compatibility – mostly 3-wire (VCC/GND/Signal) accelerator scheme.

Specifications

• Voltage indicator: 36 V (for 36 V systems)
• Governance: Thumb
• Connector: 3 wires (power, ground, signal cable)
• Button: 1 pc, momentary (function via controller connection)
• Applications: e-bike, e-scooter, e-scooter, etc.

Compatibility

• Controls supporting an analogue accelerator signal via 3 wires.
• 36 V battery systems (indicator accuracy adapted to 36 V class voltages).

Installation and notes

• Mixing polarities is forbidden – check pinout before connecting.
• The function of the button depends on your controller – refer to the manufacturer’s diagram.
• When mounting on the handlebars, leave a comfortable thumb angle and check the full travel of the lever.

FAQ

Will it work with a 48 V system?
The indicator is calibrated for 36 V – it will not read correctly with 48 V. We recommend 36 V systems.

What signal does the accelerator provide?
Standard analogue signal over 3 wires (power/mass/signal). The exact amplitude depends on the controller – follow its specification.

Can the button switch on the lights?
Yes, if your controller has a corresponding input – connect according to the diagram.

throttle grip 36v, thumb acceleration grip, ebike throttle 3-wire, e-scooter accelerator, 36v voltmeter throttle, fabiride